L&L E14S-3 Easy-Fire Kiln
Model e14S-3 Easy-Fire Automatic Kiln is a small kiln for tests and smaller ceramic projects.
It has the wifi Genesis Touch screen controller.
The control panel is angled for easy viewing of the controller without having to purchase any additional hardware.
Kiln comes with hard ceramic element holders, thermocouple protection tubes, a strong solid-top stand, and solid peephole plugs.
13-1/2" diameter by 18" high (1.5 cubic feet).
3" K23 brick. 240-volt version includes a 15-20 power cord and the 208-volt version includes a 14-30 cord.
C-MET-us listed in the USA & Canada.
Cone 10 for all voltages.
- Insulation: 3" K23 Firebrick
- Sections: Two 9" high sections
- Inside Dimensions: 13.50"
- Diameter x 18.00"High (34.29 cm Diameter x 45.72 cm High)
- Outside Dimensions 23.00"
- Wide x 27.00" Deep x 51.00"High (58.42 cm Wide x 68.58 cm Deep x 129.54 cm High)
- Weight: 150 lbs
-
ELECTRICAL REQUIREMENTS
- 240Volt/Single phase:
- Amps: 16 draw: Use 20 amp dedicated breaker
- Wire Connection: 5-20P Plug
- Wire Gauge for Connection: 14 Ga
- 208 Volt / Single Phase
- Amps: 18.5 draw: Use 25 amp dedicated breaker
- Wire Connection: 14-30P Plug (30 amp, 200-250 volt) (Kiln may be direct wired at customer's option without affecting the MET listing)
- Wire Gauge for Connection: 12 Ga
Optional Furniture Kit (H-E-K14S/00) Includes:Three 12" Full Round Shelves (1/2" thick), Four each of 1/2", 1", 2", 4", & 6" high 1-1/2" Square Ceramic Posts, and One Pair Heat Resistant Gloves
Kiln Buyers Guide
Not sure which kiln fits your work? Sizing, voltage, controllers and more, explained.
Read the guide →
| Model Number | Part Number for 3” Brick | Volts/Phase | Watts | Amps | Wire Size | Fuse Size | Power Connection |
|---|---|---|---|---|---|---|---|
| e14S-3-240 (USA) | K-E-14S3/31 | 240/1P | 3840 | 16 | 14 ga | 20 Amp | 6-20 Cordset |
| e14S-3-240 (USA) | K-E-14S3/21 | 208/1P | 3840 | 18.5 | 12 ga | 25 Amp | 14-30 Cordset |
| e14S-3-EU-220 (World) | 220/1P | 3300 | 15 | 14 ga | 20 Amp | Direct Wire | |
| e14S-3-F-220 (World) | 220/1P | 3300 | 13 | 14 ga | 20 Amp | Direct Wire |
L&L Easy-Fire Kiln Comparison
Easy-Fire is L&L's main line of top-loading pottery kilns. Every current model has 3" K23 firebrick, a Genesis touchscreen with zone control (two zones in S and M models, three in T models), hard ceramic element holders, and a 6-foot cord with plug. They come in four diameters and three heights.
| Model | Inside (diameter × height) | Capacity | Max temp | Amps | Plug | Best for |
|---|---|---|---|---|---|---|
| e14S-3 | 13.5" × 18" | 1.5 cu ft | Cone 10 (2350°F) | 16 | NEMA 6-20 | Small pieces and test firings on a 20-amp circuit |
| e18S-3 | 16.5" × 18" | 2.5 cu ft | Cone 10 (2350°F) | 23.9 | NEMA 6-50 | Hobby potters and small home studios |
| e18M-3 | 16.5" × 22.5" | 3.2 cu ft | Cone 10 (2350°F) | 33.3 | NEMA 6-50 | Home studios that want a little more height |
| e18T-3 | 16.5" × 27" | 3.7 cu ft | Cone 10 (2350°F) | 35 | NEMA 6-50 | Tall work in a small footprint |
| e23S-3 | 22.3" × 18" | 4.4 cu ft | Cone 10 (2350°F) | 39.4 | NEMA 6-50 | Wide bowls and platters, with an easy reach to the floor |
| e23M-3 | 22.3" × 22.5" | 5.5 cu ft | Cone 10 (2350°F) | 48 | NEMA 6-50 | Active home studios that want an easier reach than a tall kiln |
| e23T-3Best seller | 22.3" × 27" | 6.7 cu ft | Cone 10 (2350°F) | 48 | NEMA 6-50 | Serious home studios and schools |
| e28S-3 | 28" × 18" | 6.8 cu ft | Cone 10 (2350°F) | 47.9 | NEMA 6-50 | Large platters and wide sculpture |
| e28M-3 | 28" × 22.5" | 8.5 cu ft | Cone 10 (2350°F) | 48 | NEMA 6-50 | Big, wide loads for schools and studios |
| e28T-3 | 28" × 27" | 10.2 cu ft | Cone 8 (2280°F) | 48 | NEMA 6-50 | The biggest Easy-Fire: large low-fire loads, or cone 10 on three-phase power |
Ratings are for 240V single-phase power. On 208V single-phase, the e28M-3 is rated cone 8 and the e28T-3 cone 5. Every model except the e14S-3 also comes in a three-phase version, rated cone 10 with a NEMA 15-50 plug. Amps change with voltage, so check the spec table on each product page or tell us your voltage when you call. For frequent cone 6 firing or higher in a 28" kiln, L&L recommends the eQ2827-3 over the e28T-3.
Most Easy-Fire models also come as Easy-Fire kiln packages, with a Vent-Sure downdraft vent and a furniture kit of shelves and posts.
CUSTOMER REVIEWS - Q&A
Got a question about this product? Ask it here and get a response from our staff and also input from the Sheffield Pottery community!

