Your cart

Your cart is empty

Black Mason Stain

Here you can order Black Mason Stains for clay and ceramics in Five Pound, One Pound and Quarter Pound Increments.

Black Mason Stains are used to color ceramic clay and glazes.

It is tough to see much difference between the black stains but by a large margin most folks get the 6600 Best Black. So if you are looking for a simple black, that one is likely going to work for you!

Please call us 888.774-2529 to order larger quantities of mason stains for pottery with bulk discounts.

Mason Stains Chart

KEY TO COMPOSITION CHART
Al - Aluminum Oxide
B - Boric Oxide
Ca - Calcium Oxide
Cd - Cadmium
Co - Cobalt Oxide
Cr - Chromium Oxide
Fe - Iron Oxide
Mn - Mangenese Dioxide
Ni - Nickel Oxide
Pr - Praseodymium Oxide
Se - Selenium
Sb - Antimony Oxide
Si - Silicone Dioxide
Sn - Tin Dioxide
Ti - Titanium Dioxide
V - Vanadium Pentoxide
Zn - Zinc Oxide
Zr - Zirconium Dioxide

Reference Notes
1. Can be used as a 'body stain' in porcelain at high temperatures. All of the brown colors can be used as 'body stains' but will vary in shade considerably depending on the composition of the body and temperature at which it is fired.
1a. Use only as a 'body stain'
Firing Temperatures can only be a rough guide. Firing at 2200 degrees F on a slow schedule may give the equivalent maturing as firing at 2300 degrees F on a fast schedule. The cycle, atmosphere and rate of cooling will affect the color.
2. Max. firing limit 2156 degrees F (1180 degrees C).
3. Max. firing limit 2300 degrees F (1260 degrees C).
4. Max firing limit 1976 degrees F (1080 degrees C).
Zinc Oxide influences the color in a glaze more than any other element. Generally, zincless glazes should not contain magnesium oxide. Some colors containing zinc are to be used in a zincless glaze. The zinc in the color is in a combined form and will not harm the color, but free zinc oxide in the glaze can destroy the color.
5. Do not use zinc in glaze.
6. May be used with zinc or without zinc.
7. Zinc not necessary, but gives better results.
8. Best results with no zinc.
Calcium Oxide content as calcium carbonate should be between 12-15% for best color development. Adding the molecular equivalent of calcium oxide with wollastonite, a natural calcium silicate, often gives better uniformity. The increased silica from the wollastonite must be subtracted or the glaze will have a poor surface.
9. Glaze must contain 6.7 to 8.4% CaO (12-15% CaCO3)

5 Results

Mason Stain #6600 Black Quarter Pound

Mason Stain #6600 Black

$11.45

Unit price
per 

Mason Stain #6657 Black Quarter Pound

Mason Stain #6657 Black

$7.20

Unit price
per 

Mason Stain #6601 Velvet Quarter Pound

Mason Stain #6601 Velvet

$12.51

Unit price
per 

Mason Stain #6666 Cobalt-Free Quarter Pound

Mason Stain #6666 Cobalt-Free K4266

$7.58

Unit price
per 

Mason Stain #6612 Onyx Black Quarter Pound

Mason Stain #6612 Onyx Black K5578

$16.27

Unit price
per 

OUR PROCESS

Natural Sheffield Clay is mined on our property from as seen at one of the open clay pits. The Sheffield Clay deposit is located in Sheffield, Massachusetts, on U.S. Route 7 in the Southwest corner of Berkshire County.