You are browsing ceramic kilns, glass fusing kilns, raku kilns and test Kilns. This is a
Paragon SC-2 Silver, PMC & Glass Kiln
Available Options:
Bead door, View Window or both:
Fiber Shelf: Place the standard fiber shelf directly onto the kiln bottom. This shelf is used to support silver and gold clay. Fire only silver or gold clay on the fiber shelf—never ceramics, enameling or glass. Do not coat the fiber shelf with glass separator or kiln wash.
Fireclay Shelf: Ceramic fireclay shelves, available from Paragon, protect the firing chamber bottom and provide a smooth surface. Use a ceramic shelf in your jewelry kiln to fire ceramics, glass, and enameling.
SILVER, GLASS, AND PMC KILN SHOWN RIGHT WITH OPTIONAL BEAD DOOR AND OPTIONAL WINDOW
The digital SC-2 kiln fires silver clay, PMC, decals, china paint, enameling, and glass in minutes up to 2000°F. The Paragon SC-2 is popular with seminar teachers because it fires fast, plugs into a standard 120 volt household outlet, ships by UPS, and is easy to sell.
This glass, silver, and PMC kiln has been in production since 1997. It is a proven design
that we have steadily refined every year. Thousands of artists in the
U.S., Canada, Europe, and Japan love their SC-2.
The SC-2, for a digital kiln, is surprisingly affordable. This silver kiln fires automatically at the rate and temperature you enter. A large, brightly
lit display prompts for firing rate, temperature and hold time. Use the
hold feature to automatically soak any type of clay silver to its
recommended time.
The optional 6 1/2” wide bead door includes a brushed
stainless steel mandrel holder. The high-tech ceramic fiber firing
chamber is wrapped in a steel inner case. The outer steel case remains
cool due to the layer of air between it and the inner case. In
addition, the case is slotted for air circulation. Electrical
components, located in the base, stay cool even at extended hold times.
The fast-firing element of this PMC, glass, and silver kiln is embedded in the firing chamber shell. The SC-2 silver clay kiln heats from the sides and back. Each SC-2
includes a 1/4” thick ceramic fiber shelf.
Paragon SC-2 Features
- 6 1/2”-wide bead door with brushed stainless steel mandrel holder
- On/off safety switch
- Built-in base; no extra stand needed
- Door opens 180 degrees
- The case is slotted for air circulation
- Electrical components in the base stay cool even at extended hold times
- The embedded element heats from the two sides and back
- Top vent complete with tapered plug for lost wax casting
- Includes a 1/4” thick ceramic fiber shelf
- Optional SC-2 glass view port
The Sentry Xpress 3-key controller is packed with features. It includes two modes: Single Segment and 8-segment Ramp-Hold.
Features of the Sentry Xpress 3-key Controller on the Paragon SC-2
- Design programs with up to 8 segments (steps) in Ramp-Hold mode.
- Fire to a single temperature at a single speed in the simplified Single Segment mode.
- Ramp-Hold mode can store 4 programs.
- Skip Segment feature in Ramp-Hold mode
- Temperature hold
- The Sentry Xpress can control both heating and cooling.
- Program Review lets you check that the program you are about to fire is correct.
- Temperature Display throughout firing and cooling in your choice of °F or °C
- Error Messages report mechanical problems such as a disconnected thermocouple, stuck relay or broken element.
- 12 Month Warranty
- LED Lights show whether you are in program, review, or firing mode.
The Paragon SC-2 can ship by UPS. Specially
designed cartons and foam padding assure that the kiln will arrive
safely.
Specifications
Max. Temperature
|
2000F 1093C
|
Amps
|
12
|
Phase
|
1
|
Watts
|
1440
|
Nema
|
5-15P
|
Breaker Size
|
15
|
Circuit Wire Size
|
14 gauge
|
UL
|
Y
|
CE
|
Y
|
Control Type
|
Sentry Digital 3-key Glass Control
|
Voltage
|
120
|
Hertz
|
60
|
|
Sides
|
4
|
Chamber Volume
|
0.21 CU.FT.
5.95 litres
|
Chamber Width
|
8.00
204 mm
|
Chamber Depth
|
7.75
197 mm
|
Chamber Height
|
5.75
147 mm
|
Outer Size
|
13.25W x 14.00D x 15.50H Inches
337W x 356D x 394H mm
|
Ship Size
|
21.50W x 18.75D x 16.50H Inches
547W x 477D x 420H mm
|
Ship Weight
|
36.00 Lbs.
16.33 Kg.
|
Ship Method
|
This Kiln Ships Via UPS
|
|
|
|
|
Part Number
|
0221131B00 * Base Model
|
|