Home > Kiln Shelves, Posts, Cones and Kiln Firing Accessories > Kiln Controllers and Pyrometers >

L&L Kilns Genesis Touchscreen Controller Retrofit Board

L&L Kilns Genesis Touchscreen Controller Retrofit Board
L&L Kilns Genesis Touchscreen Controller Retrofit Board


 
L&L Kilns Genesis Touchscreen Controller Retrofit Board
Our Price: $345.00


Availability:: Usually Ships in 1 to 2 Weeks
Product Code: LKNGGENSBD
Qty:

Description PRODUCT VIDEOS
 

L&L Kilns Genesis Touchscreen Controller Retrofit Board


N-G-GENS/BD
Genesis Touch Screen Control Board. You can replace your DynaTrol with this control board.

A replacement DynaTrol control will typically have our standard configuration for Type K thermocouples, 18 Deg F thermocouple offset, and 3 zone control.
THIS MAY NOT MATCH YOUR KILN!
Here is what you need to check: CHECK THE THERMOCOUPLE TYPE This is the MOST IMPORTANT thing to do. If you kiln has type S thermocouples and the control is set up for type K thermocouples you could overfire the kiln to the point of a complete melt-down. Type K thermocouple extension wire (the wire that goes from the thermocouple to the control) is either yellow or brown. Type S extension wire is green (in the USA).

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Kiln Shelves, Posts, Cones and Kiln Firing Accessories > Kiln Controllers and Pyrometers
Kilns > Skutt Kilns > Skutt Kiln Upgrades and Accessories