Paragon Kiln Xpress-E-12A : for Glass and PMC:
Bronze Clay, China Painting, Decals, Enameling, Glass Fusing, Glass Painting, Glass Slumping, Lost Wax Casting, Silver Clay
Paragon Xpress-E-12A
The digital Xpress-E-12A fires to 2000°F (1093°C)*. Create breathtaking jewelry or small keepsakes in silver clay, enameling, china painting, glass, lost wax casting, bronze clay, or ceramics. Since the kiln opens from the front, it is ideal for copper enameling.
Imagine the glass you could sag, slump, and fuse with this kiln. Make small bowls, pendants, earrings, cufflinks, and even bracelets. Enjoy the glittering beauty of dichroics. This kiln will give you years of creative enjoyment.
The Xpress-E-12A comes with the Sentry Xpress digital controller mounted in the kiln base (instead of a side switch box) to save table space. The kiln includes a door safety switch that turns off the element when the door is opened. The controller automatically resumes firing when you close the door.
Now includes the Bartlett Sentinel Mini Touch Controller!
Temperature displays throughout firing and cooling in your choice of °F or °C.
Thermocouple Offset adjusts the thermocouple readout. Set the Delay to turn on the kiln later to suit your schedule. Error Messages report mechanical problems such as a disconnected thermocouple, stuck relay or broken element.
12 Month Warranty
LED Lights show whether you are in program, review, or firing mode. Colorful, illustrated instruction manual. Download it from the “Additional Information” section below to review these features in more detail.
The Xpress-E-12A heating element, exposed in dropped, recessed insulating firebrick grooves, is easy to replace if ever necessary. The 2 1/2” thick firebricks store plenty of heat for slow cooling through the glass annealing range. For small glass pieces such as jewelry, you can anneal without having to turn the element back on during cooling. (If extra heat is necessary to anneal large pieces, that is easy. Just program a slow cooling segment in Ramp-Hold mode.) The firebricks store heat for quick temperature recovery after removing a copper enameling piece.
The thermocouple is protected with a high-nickel stainless steel sheath for long life. A switch on the front panel turns off power to the controller when the kiln is not in use.
Unlatch and open the door with one hand; the latch operates so smoothly that delicate copper enameling or silver clay pieces remain undisturbed while opening or closing the door. The door opens smoothly on a heavy-duty 1/2” hinge shaft. No extra stand is needed; the built-in base stays cool even during extended hold times.
The interior is large enough to fire a 10” bronze clay container. A vent hole in the top, complete with tapered vent plug, is designed for lost wax casting. You can also vent combustible cork clay and other fillers used with silver clay.
The Xpress-E-12A can ship by UPS. Enjoy lower shipping cost and faster service. Specially designed cartons and foam padding assure that the kiln will arrive safely.
Paragon kilns are built to be dependable.
They are loaded with attention to details, such as the costly nickel-plated copper wire with high temperature glass-braided insulation. Wires are fastened to the elements with heat-dissipating connectors refined and proven over many years in Paragon kilns.
The Xpress-E-12A has a durable high temperature, water-base finish.We chose water-base paint because of the low emissions during spraying. This creates a safer working environment for our employees and cuts down on air pollution.
Paragon kilns are made in America by skilled workers.
Becky Johnson, a glass teacher in Dallas, Texas, describes opening a kiln to see the freshly fired glass: “I like to open the kiln with my students so that we can review and admire each other’s treasures together. The transformation of the glass inside the kiln is magical and mystical. It changes from pieces of arranged cut glass to awe-inspiring art. To be some part of that process is a true gift.”
“Paragon kilns just go on working forever,” said Jeff Zamek, author of “What Every Potter Should Know.” He added, “Paragon kilns have one of the lowest incidences of repair of any kiln manufactured in the U.S.”
*The standard Xpress-E-12A is rated to 2000°F (1093°C).
Designed for production
Paragon’s warranty is not affected by frequency of use. Fire your new kiln every day if you want, even in commercial settings. That will have no effect on the warranty period.
Optional colors at no extra charge
Brighten your studio with color! Order your kiln in one of our standard colors at no extra charge . . . berry, black, blue, hot pink, jade, navy, purple, or turquoise. Scroll down to see color samples in the options section.
Specifications
Max. Temperature
|
2000F 1093C
|
Amps
|
15
|
Phase
|
1
|
Watts
|
1800
|
Nema
|
5-15R
|
Breaker Size
|
20
|
Circuit Copper Wire Size
|
12 gauge
|
TUV tested to CSA and UL Standard 499
|
N
|
CE
|
N
|
IMPORTANT: Some areas such as Canada and Europe require a lid or door safety switch on kilns.
|
Control Type
|
Sentry Xpress 4.0 Digital 3-Key
|
Voltage
|
120
|
Hertz
|
60
|
Nema Details
|
|
Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations.
The pricing and electrical specifications for the above products reflect their design for use in the United States. The International versions of most models will have variations in electrical specifications and price due to consumer safety requirements or electrical regulations.
|
|
Kiln Type
|
Front Loading Square
|
Sides
|
4
|
|
|
Chamber Volume
|
0.35 CU.FT. 9.91 litres
|
Chamber Width
|
8.50 IN 216 mm
|
Chamber Depth
|
12.00 IN 305 mm
|
Chamber Height
|
6.00 IN 152 mm
|
The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom
|
Outer Size
|
14.00W x 22.50D x 17.00H Inches 356W x 572D x 432H mm
|
Ship Size
|
28.00W x 21.00D x 24.00H Inches 711W x 533D x 610H mm
|
Ship Weight
|
84.00 Lbs. 38.10 Kg.
|
Ship Method & Notations
|
This Kiln Ships Via UPS/FedEx
|
|
|
|
|
Part Number
|
S1341-3 * Base Model
|
|