Home > Kilns > Paragon Kilns > Paragon Pottery and Ceramics Kilns >

Paragon Enameling Collar For Caldera Kilns


Paragon Enameling Collar For Caldera Kilns


 
List Price: $192.47
Our Price: $189.00
You save $3.47!


Availability:: Usually Ships in 2 to 3 Weeks
Product Code: PCEC
Qty:

Description
 

Paragon Enameling Collar For Caldera Kilns


Caldera-E Enameling Collar

The Caldera-E collar stacks onto the modular Caldera or Caldera-S, adding 6 3/4” of height to the kiln. The Caldera-E collar has a 7 ½” x 4” copper enameling door on the side. Now you can explore the exciting art of copper enameling without having to buy a front-loading enameling kiln. The door is large enough for small enameling pieces such as pendants. The kiln ships with a rare earth magnet to hold the enameling door open, and a stainless steel bead mandrel holder. The mandrel holder attaches to the front of the kiln.

1500 F maximum temperature

The Caldera-E kiln collar has no heating elements. For this reason, the Caldera-E collar will slow down the firing rate of the Caldera and Caldera-S and reduce the maximum temperature to 1500°F (815°C). The collar is made of 2 ½” thick hand-selected insulating refractory firebricks. The firebricks, wrapped in heavy-gauge stainless steel, store heat for minimal heat loss after opening the door to remove a copper piece.

Please be aware when firing the Caldera with any collar in place, the maximum temperature is reduced. Enameling Collar – 1500°F; Bead Collar – 2000°F; Extension Collar – 2000°F

Rugged construction

To strengthen the firing chamber, the firebrick corners are fitted together with L-shaped notches. This type of joint lasts longer than the butted joint and the "picture frame" mitered joint found on competitive brands. Rugged construction makes this kiln a real workhorse. For each maintenance, the stainless steel case includes case tighteners. The quality Caldera-E kiln collar is proudly made in the U.S.A.

Imagine the beautiful copper enameling you could make in this Paragon Caldera kiln. The Caldera-E bead collar will give you a haven of creative enjoyment that you will especially appreciate when life gets hectic.

The Caldera-E can ship by UPS. Enjoy lower shipping cost and faster service. Specially designed cartons and foam padding assure that the kiln will arrive safely to your door.

Warning for the Caldera Kiln Equipped with a Lid Safety Switch and Collar

The Paragon Caldera kiln was intended to be a stackable kiln with a separate lid and bottom. However, the lid must be hinged to the Caldera body when a lid safety switch is installed. To stabilize a Caldera kiln that has a hinged lid, we attach the kiln body and kiln bottom together with two latches.

If an unlatched kiln collar (enameling, bead, or extension) is mounted between the Caldera body and the kiln bottom, care must be taken when opening the hinged lid. Do not open the lid past 90 degrees (where the lid is straight up) unless the lid leans against a heat-proof support behind the Paragon Caldera kiln.

Made in the USA

The Caldera-E is proudly made in Mesquite, Texas by skilled craftspeople. Not only that, but phone calls during business hours are answered by a live person at the Mesquite factory. We are open from 7 a.m. to 5:30 p.m. Central Standard Time Monday through Thursday. Call us—we would enjoy hearing from you. Our customer service representatives will be glad to help you after the sale, even long after the kiln is out of warranty, and at no charge.

Specifications

Max. Temperature

1500F
815C

Amps

0

Phase

0

Watts

0

Nema

0

Breaker Size

0

Circuit Copper Wire Size

0 gauge

TUV tested to CSA and UL Standard 499

N

CE

N

Control Type


No Control System

Voltage

N/A

Hertz


Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations.

The pricing and electrical specifications for the above products reflect their design for use in the United States. The International versions of most models will have variations in electrical specifications and price due to consumer safety requirements or electrical regulations.

Kiln Type Top Loading Square

Sides 4

Understanding Chamber Measurements

Chamber Volume 0.25 CU.FT 7.08 litres

Chamber Length 8.00 IN 203 mm

Chamber Width 8.00 IN 203 mm

Chamber Depth 6.75 IN 171 mm


The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom

Outer Size 15.00W x 14.00D x 6.75H Inches

Ship Size 25.00W x 18.00D x 18.00H Inches

Ship Weight 21.00 Lbs.

Ship Method & Notations This Kiln Accessory Ships Via UPS

Part Number S074328 * Base Model



Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Kilns > Paragon Kilns > Paragon Pottery and Ceramics Kilns
Kilns > Paragon Kilns > Paragon Glass Kilns and PMC Kilns
Kilns > Paragon Kilns > Paragon Heat Treating Furnaces and Knife Making Kilns