MIX AND MATCH BOXES FOR AN AUTOMATIC 10% DISCOUNT ! EASY SHIPPING INCLUDED PRICES!
The Large and Self-supporting cones are used to measure temperature uniformity and/or if there was sufficient heatwork done to mature the ware. Cones indicate whether the ware received an adequate amount of heatwork to properly mature the clay or glaze. A properly fired cone will bend over with the tip of the cone almost touching the shelf. After firing a kiln, a simple glance at the cone can tell if the firing was successful. The small and bar cones are mainly used in the kiln shut-off device called the Kilnsitter. This is a mechanical device that shuts off the kiln when the temperature inside is sufficient to cause the cone to deform under the weight of the Kiln-sitter rod. The only true measurement of heatwork is from a Large or Self-supporting cone placed on the shelf next to the ware.
Large Cones (Orton Pyrometric Cones)
Join our mailing list!
TOLL-FREE:1.888.774.2529 Hours: Mon - Fri 8:30 - 5:00 EST Saturday and Sun 10:00-4:00