You are here:Home > Kilns > L&L Kilns > L&L eFL Series Easy-Fire Front Loading Kilns
L&L kilns eFl logo

L&L eFL Series Easy-Fire Front-Loading Kilns



L&L eFL Front Loading Kilns Features

The First Front-Loading Kiln for the Price of a Top-Loader

L&L Kilns Easy-Fire eFL Series Front-Loading Kilns are designed with the same arched bricks L&L has used successfully for 30 years in our square and rectangular DaVinci kilns. The sides and top are arched for super strength. The base, door and door frame are formed from precision sheet metal to be both lightweight and strong. Two shelves provide storage for kiln furniture and structural support. Rated for cone 10.
These kilns ship easily by common carrier, are inexpensive to buy, install, and maintain.
MORE INFO BELOW PRODUCTS...


Sort By:
Page of 1
L&L Kilns Easy-Fire eFL1626 Front Loading Kiln L&L Kilns Easy-Fire eFL1626 Front Loading Kiln

L&L Kilns Easy-Fire eFL1626 Front Loading Kiln

List Price: $6,800.00
Our Price:
$6,119.00
You save $681.00!
L&L Kilns Easy-Fire eFL 2026 Front Loading Kiln L&L Kilns Easy-Fire eFL 2026 Front Loading Kiln

L&L Kilns Easy-Fire eFL 2026 Front Loading Kiln

List Price: $7,500.00
Our Price:
$6,749.00
You save $751.00!
L&L Kilns Easy-Fire eFL 2626 Front Loading Kiln L&L Kilns Easy-Fire eFL 2626 Front Loading Kiln

L&L Kilns Easy-Fire eFL 2626 Front Loading Kiln

List Price: $8,475.00
Our Price:
$7,619.00
You save $856.00!
L&L Kilns Easy-Fire eFL 2635 Front Loading Kiln L&L Kilns Easy-Fire eFL 2635 Front Loading Kiln

L&L Kilns Easy-Fire eFL 2635 Front Loading Kiln

List Price: $10,000.00
Our Price:
$8,999.00
You save $1,001.00!
   
 

L&L Easy-Fire eFL Series Front Loading Kilns : INFO AND SPECS


The L&L Kilns eFL front loading kilns are available in five sizes ranging from 4 cubic feet to 13.7 cubic feet. (Except for the eFL1626 208/single phase) they all have the power to fire to cone 10 temperatures!

Features & Benefits

Temperature Rating: Cone 10, 2350°F, 1290°C (Except for the eFL1626 208/single phase which is cone 5)
Door: Horizontal swing door. Heavy-gauge metal case with easily changed brick section. Hinge is adjustable in two planes. Includes extra insulation, easy-to-use toggle clamps, and ceramic fiber gasket. The entire door is removable and swings 180 degrees to the case for easy moving of the kiln through doors.
Stand: Heavy gauge stand with two shelves. Leveling bolts and anchor holes included. Stand comes assembled in the US and Canada but can be disassembled for compact air shipment.
Built-In Shelf Rack: A built in stainless steel shelf rack and shelf for posts saves space and hundreds of dollars.
Construction: Stainless steel wrapped around brick clamped with adjustable screw clamps. Sides and top are arched for super-strength.
Assembly: Door is easily removable. All models fit through a 31” wide by 75” high door. Stand is removable.
Insulation: 3” K23 firebrick. Extra 1” of backup on door to balance heat distribution.
Brick Coating: Proprietary reflective brick coating included. This helps firebrick stay strong on the surface and helps prevent dusting.
Hard Ceramic Element Holders: Protect brick from loading damage, keep elements from falling out of grooves, make changing elements easy, and optimizes heat transfer to load. All with no element pins.
Control: DynaTrol with 4 Easy-Fire programs, 6 Vary-Fire programs, PreHeat, Delay, Program & Segment Review.
Zone Control for Even Heating: Two in the eLF1616) or Three zones (in all other models) with separate thermocouples.
Control Panel: Controls and components are mounted in a separate control panel and piggy-backed to the element connection box. This separation helps keep the controls cool. The control panel is bottom-hinged for easy access and maintenance. Control box is easily removed for service. On/off switch and fuse included.
Thermocouples: Type K 8 gauge with ceramic protection tubes.
Element Design: Quad heavy-duty elements on sides and back. Low watt density for long life.
Door Element Safety Switch: Honeywell limit switch turns power off to elements when the door is open. Included as standard equipment.
Peephole Plug: One solid ceramic plug with heat-locked head. 1” diameter full-view non-tapered. Located in door center.
Instructions: Complete visual instructions.
Warranty: Limited 3 year warranty. (hotkilns.com/warranty).
UL 499 Listing: Planned

Click HERE for complete Dimension & Weight Specifications

eFL1616: (17"W x 16"H x 26"D - 4.0 Cubic Feet)

eFL1626: (17"W x 26"H x 26"D - 6.6 Cubic Feet)

eFL2016: (22"W x 26"H x 26"D - 8.6 Cubic Feet)

eFL2626: (26"W x 26"H x 26"D - 10.2 Cubic Feet)

eFL2635: (26"W x 35"H x 26"D - 13.7 Cubic Feet)