L&L Kilns: Single and Multi-Zone Pyrometers

The TRU-VIEW DIGITAL multi-zone Pyrometer system can be factory or field installed. The metal box includes a bracket for mounting the pyrometer system to either the kiln or a wall. The TRU-VIEW is available with from 1 to 5 thermocouples. All thermocouples have 42" long lead wires (although these can be made longer by special order).

You can order the system with standard 8 gauge exposed thermocouples or with metallic sheathed pyrocil thermocouples.

FEATURES

A tool to help you accurately control your manual kiln:

Know the real temperature in your kiln at all times.
Get accurate low temperature control. Accurately control cool-down.

Control temperature gradients
With the unique design of the Jupiter and DaVinci manual switching circuits, temperature differences are easily corrected at the maturing point by measuring the temperatures to detect any difference between top and bottom. Necessary adjustments are easily made by the zone switching controls on the kiln.

More flexible placement of loads:
You may place your load to best advantage without regard to temperature differences.

Better glaze results
This is possible when used with the Jupiter or DaVinci switching action. Control over the flow of glaze is possible by varying the time and temperature. This may be accomplished by holding your temperature at a particular level. By observing your pyrometer and using your switches to their best advantage, it is possible to hold your temperature constant for varying periods of time until through practice you are able to obtain far superior glaze and body results.

Quality construction
The pyrometer is an accurate digital pyrometer - much more accurate over a full range than our older analog meters.

Three year Limited Warranty