(ST) Amaco Stone Texture Glazes for Low Fire Ceramics and Pottery
These glazes have a smooth, unique stone-like surface
when fired over a mature Cone 04 bisque. The ST glaze series flows a
little in the firing, settling in the crevices and towards the bottom of
a vertical surface. Therefore, when applied over a textured surface
they will produce antique-like variations or a weathered and worn out
look on the higher relief areas of the piece. Because they move
slightly, care should be taken to taper down the glaze application
towards the bottom of the piece so that the piece will not stick to the
kiln shelf during firing.
•For Stone-Like Surfaces
•Break and Pool Over Texture
•Different effects on red and white clay
Join our mailing list!
TOLL-FREE:1.888.774.2529 Hours: Mon - Fri 8:30 - 5:00 EST Saturday and Sun 10:00-4:00