Product price is not filled in. This product cannot be purchased.
Product price is not filled in. This product cannot be purchased.
Product price is not filled in. This product cannot be purchased.
Mayco Designer Liner 401 BLACK
Designer Liner is a concentrated, clay-based pigment, packaged in a 1.25 oz. squeeze bottle featuring a metal writer tip. The metal tip allows for precise application - almost as accurate and precise as a ball point pen. You can create designs, outline shapes or patterns in your design, create stripes, dots, squiggles & lines, or write words.
It can be applied directly on clay, bisque, or over other glazes. Designer Liner will fire to a matte finish - a clear or transparent glaze (Foundations Sheers, for example) will give it a gloss finish.
Designer Liner can also be applied using a liner brush, such as CB-110 #10/0 liner. Will fire from cone 05/06 up to cone 6.
Product Features & Attributes
- Quick Drying - design integrity is maximized, but clogging the narrow passages of the metal and/or plastic tips may occur. The small straight pin is provided to ream either orifice should it become clogged.
- Matte Finish - may require a clear or transparent glaze if a gloss finish is desired.
- Non Toxic, Food Safe. May not be suitable for dinnerware due to surface characteristics.
- 1.25 oz squeeze bottle (includes metal writing tip)
Helpful Hints
- Remove the white cap then gently puncture plastic tip with the metal writer tip.
- After placing the metal tip onto the bottle cap, push the included pin through the small ziptop bag and seal (this makes it easier to keep track of the pin).
- Keep the pin in the metal writer tip when not in use.
- Designer Liner is clay based. As such, it is the nature to dry quickly which can promote clogging in the narrow passages of the metal and or plastic tips.
- Clear or transparent glazing is necessary for gloss finish. Designer Liner will fire matte when no glaze is applied over top.
- Design work could be distorted when applied on top of glazes that have a tendency to move.
- Wipe tip periodically on a damp sponge to keep clean.
- Keep the metal pin to unclog the tip and keep the metal writer tip free from debris.
- If Designer Liner begins to dry in the bottle you can add a few drops of water to reconstitute Designer Liner. Stir and test for proper viscosity. Add water in small amounts to avoid over-thinning the Designer Liner.
- Place some Designer Liner on a tile and use a CB-110 #10/0 Liner Brush for extra fine outlining or detailing.
- Designer Liner is not a dimensional product. If applied too thick or heavy, Designer Liner will crack and possibly pop off.
