You are browsing ceramic kilns, glass fusing kilns, raku kilns and test Kilns. This is a
Paragon QuikFire 6 Kiln —From Zero to 1000°F in Five Minutes!
THIS IS A MANUAL KILN: IT DOES NOT INCLUDE ANY CONTROLLER
The Paragon QuikFire kiln brings instant gratification to ceramics, glass fusing, enameling, silver, and china painting. Small
glass pieces can be fired and cooled to room temperature in only 30 to
40 minutes. Small ceramic pieces take only 40 to 50 minutes. No more waiting to fill your larger kiln to test-fire a new technique or new glaze with this ceramic kiln for sale. No more waiting until morning to see freshly fired ware.
Demonstrate the Paragon QuikFire kiln to your family and watch their astounded reaction. Demonstrate it at craft shows, and
crowds will gather.
Experimenting with this Paragon ceramic kiln is fun. Instead of risking a good piece of greenware on an untried technique,
you can fire throw-away clay scraps and view the results in minutes.
This ceramic kiln for sale is a learning tool you will use over and over, whether you’re a beginner or a master.
The QuikFire pottery kiln features a ceramic fiber shell with an
embedded element. It measures 6" x 6" x 6" inside. The shell rests on a
ceramic fiber base with steel stand. The Paragon QuikFire kiln is rated to 2000°F. It fires on 120 volts and needs no other heating source. At only 1560 watts, this ceramic kiln for sale uses less power than many hair driers.
To see how your work is progressing, tilt the
shell up an inch for several seconds. Read temperature at a glance with
the built-in pyrometer, which indicates when to start watching the ware
inside the kiln.
You can make projects faster with two or more
shelves. As the kiln is firing, prepare your next project on the spare
shelf in the furniture kit. Remove the first shelf and insert the
second. Leave items on the hot shelf that need slow cooling. The shelf
keeps the pieces warm.
Consider purchasing a copy of “Sandi Scoville’s Basic Glass Fusing Tape,” a QuikFire glass fusing and slumping video tape with this ceramic kiln for sale. For European voltage, specify the QuikFire 6E.
QuikFire 6 Optional Furniture Kit (not included)
2 C-2 Shelves One Haik Brush
1 lb. Bag Glass Separator
Optional PCB-1 Power Control Box
Uses an infinite control switch to slow the
QuikFire 6 and earlier QuikFire 2 kilns. Slower firing is necessary for
large, thick pieces. Simplifies enameling and fusing decals to ceramics
or glass. May be used for other kilns rated to 120 volts, 15 amps.
The QuikFire 6 can ship by UPS. Enjoy lower
shipping cost and faster service. Specially designed cartons and foam
padding assure that the kiln will arrive safely.
“Everyone loves the QuikFire. While your main
work is firing, you can have fun with the QuikFire.”—Dan Fenton, Fenton
Glass Studio, Oakland, California
Circuit Copper Wire Size
TUV tested to CSA and UL Standard 499
No Control System
Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations.
The pricing and electrical specifications for the above products reflect their design for use in the United States. The International versions of most models will have variations in electrical specifications and price due to consumer safety requirements or electrical regulations.
Front Loading Square
Understanding Chamber Measurements
The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom
14.75W x 12.50D x 12.25H Inches
375W x 318D x 311H mm
16.00W x 16.00D x 14.00H Inches
406W x 406D x 356H mm
Doorway Clearance Needed
Ship Method & Notations
This Kiln Ships Via UPS
QFVI * Base Model