L&L E23T-3 Easy Fire Kiln :
Special Package with Vent, Furniture Kit and Genesis Touch Screen Controller
Special Sale: On now! SAVE !!!
Best selling L&L kilns packaged:
Easy Fire Kilns Package includes Vent System, Furniture Kit, Genesis Touch Screen and Free Freight* and Free Lift Gate.
*free freight to most places in the lower 48. Some restrictions apply.
Easy enough for the novice yet robust enough for the
professional. 3" brick assures good efficiency and even heating. A
great value, reliable and Three Year Limited Warranty. It is a very versatile size for potters and sculptors: 6.7 cubic feet.
This kiln is recommended for small studios and schools. This cone 10 kiln features 3" insulation to handle the rigors of higher firing temperatures. L&L
kilns feature hard ceramic element holders. These reduce wear and tear
on your kiln by preventing chipped bricks from bumping the sides with
shelves when loading. The element holders also make element replacement
easier and faster.
This is one of our top-selling kilns. The full-size control panel makes it simple to program custom firing curves but
most people find everything they need in the slow and fast bisque and
glaze programs already installed at the factory.
L&L Easy-Fire Kilns are backed by a three year warranty.
You can expect many years of great firings in your L&L Easy Fire kiln!
FURNITURE KIT INCLUDES:
Includes: Two 20" Full Round Shelves and Four 20" Half Round Shelves (3/4" thick), Six each of 1/2", 1", 2", 4", 6", & 8" high 1-1/2" Square Ceramic Posts, and One Pair Heat Resistant Gloves
The L&L E23T-3 Easy Fire kiln meets the needs of teachers, institutions, camps,
hobbyists, potters and others who
need an easy to operate, easy to
set up, easy to maintain, easy to
understand, and easy to buy kiln.
It has L&L’s robust and time-proven
technology like ceramic element
holders, industrial-grade element
terminals, ceramic thermocouple
protection tubes, heavy-duty
elements, corrosion resistant
materials, “Easy-Open, Easy-Load”
spring hinge, removable control
panel and zone control with four L&L “Easy-Fire” programs. Get everything
you need for one easy price.
OPTIONAL CONE 6 Starter kit:
Orton self Supporting cones
1 box Cone 04 (for bisque fire)
1 Box Cone 5
2 Boxes Cone 6
1 Box Cone 7
5 Pounds of Kiln wash for your shelves
1 Roselli 12 piece 2.5 " #6HD Stilts
1 Roselli 12 piece 1.5" #4HD Stilts
Specifications and Features
TEMPERATURE RATING: Cone 10
INSIDE DIMENSIONS: 22-3/8'' diameter by 27'' high with 3'' brick, 6.7 cubic feet
OUTSIDE DIMENSIONS: 32'' wide by 40'' high by 45'' deep
RECOMMENDED FLOOR SPACE: 54'' wide by 54'' deep
ENERGY, TIME AND FIRING COSTS:
Typical heat up to cone 6 with a 85 pound load and with Vent-Sure on at
240 Volt/single phase will be slightly less than 6-1/2 hours, 58 kW
hours, $5.80 @ 10 cents per kW hour.
365 pounds for kiln. 390 pounds for kiln with vent. 455 pounds for kiln
with furniture kit. 480 pounds for kiln with vent and kit.
Shipping class 85.
SHIPPING DIMENSIONS: 44'' by 44'' by 54'' high (with Furniture Kit)
Element Support Hard Ceramic Element Holders
Element Terminations Stainless Bolts on Ceramic Blocks, no special tools needed
Zone Control Included at no extra cost (three zones)
Thermocouples Heavy-duty 8 gauge with Ceramic Protection Tubes (3)
Hinge Spring-Assist reduces weight of lid
Hinge Support Bars No - nothing to get in way of loading
Door Angle When Open To the back (doesn’t hang over opening)
Hinge Safety Latch Yes. Locking plunger pin, very positive & secure
Stand Full support, 14 ga aluminized steel with rigid bends
Brick Coating Reflective coating on entire interior, hardens brick
Easy Delay Start, Preheat, Hold Yes
Number of Easy Ceramic Programs Four
Number of User-Defined Programs Six
Instructions Complete easy-to-read visual manual, Video included
On/Off Switch Yes - you can turn kiln off
Control Fuse Yes
Control Panel Removable, separate piggybacked panel for control
Power Cord 6-50P for 1 phase, 15-50P for 3 phase
Sectional Construction Yes, easy to move and set up
Reversible Bottom Yes
Cone Limitation Cone 10
Brick Thickness 3''
Case Construction Stainless Steel, 3 clamps each
Assembly Screws Stainless Steel
Safety Agency Listing c-UL-us listed, Vent-Sure vent is also c-UL-us listed
Vent Downdraft, fumes under vacuum, motor on wall
Warranty Three Year Limited Warranty for both kiln & vent
Included Vent Sure System
mounting the fan assembly away from the kiln L&L ensures the safety
of the vent, keeps the vibration of the motor away from the kiln and
ceramic ware, and keeps the heat of the kiln away from the fan motor
for long trouble-free life. The fumes can’t get pushed out into your
room through a leak in the duct. The patented downdraft technology from
Orton improves kiln uniformity and improves glaze color. easyfire kilns
and the Vent-Sure vent system are c-UL-us listed.