Paragon Janus-23 Dual Media Combination Glass / Pottery Kiln

INCLUDES DELUXE ROLLING KILN STAND!
22.5"Dia x 20.25"D
2350°F Max Temp
240 Volts / 1 Phase / 60 Hz 37 Amps 8918 Watts
Sentry 12-Key Controller

The new Paragon Janus-23 can fire both pottery and glass. Heating elements are mounted in the lid and sidewalls.

Select between glass and pottery with the flip of a switch. With the switch in the glass position, heat comes from the top elements and the middle sidewall element. With the switch in the pottery position, heat comes from only the sidewall elements.

In the glass mode, fuse and sag large glass projects placed on a single shelf. In the pottery mode, fire to cone 10. You can also fire several shelves of smaller glass pieces using the pottery mode.

The elements in the lid are mounted in a firebrick “ball” groove that eliminates element pins. The element coils are wider than the groove opening, so the elements stay in place without pins. The groove dissipates heat efficiently.

The lid on the Janus-23 is easy to lift with the exclusive, patented Paragon spring counter-balance. For easier maintenance, we use 2” high blank wall bricks in the top row. Since the brick is without element grooves, it is less susceptible to damage during loading.

The patented control box on the Janus-23 opens forward for easy maintenance. A folding support arm holds the box in the open position.

• Glass/pottery selection switch
• 3” insulating refractory firebrick walls
• Sidewall elements in dropped, recessed brick grooves are easy to replace.
• Tapered peepholes for a wide view
• A steel floor pan supports the entire brick bottom of each kiln.
• One year limited warranty
• Available in 240, 200, 208, or 380 volt, 50 or 60 hertz, single or 3 phase.
• Easy-access control box with folding support arm.
• Since the Janus-23 is designed for porcelain, it also easily fires ceramics, china paint, decals, gold and, of course, glass.

Specifications