OLYMPIC FL FRONT LOADING KILNS w/ Electronic Controller V6-CF
See these kilns complete specs in chart below:
These kilns are equipped with the V6-CF Electronic Controller: No Manual version is available at this time. Furniture kits shown below are for information only: Furniture kit is not included If you are interested in these kilns you may want to see our special SHEFFIELD POTTERY OLYMPIC FRONT LOADER KILN PACKAGES which are this same line of kilns packaged for a special low price with the most popular options including vent, furniture, door and floor element and more!
The frames of the Olympic top and
front-loading commercial electric kilns
are built of heavy angle iron and metal
tubing. Walls are 4 1/2" insulating
brick with 1" ceramic fiberboard
and 1" air space created by the
tube frame. The result is an energy
efficient electric commercial kiln
with a cooler skin and outside temperature.
Top and front-loading electric kilns
are all built with double insulated
floors consisting of brick and ceramic
fiberboard. Thicker doors and lids
have been designed for the Olympic
commercial electric kilns. The front-loading
kiln doors are built with heavier steel
and the 4 1/2" brick insert in
the door for the elements is backed
by 1" x 1" steel tubing and
1" ceramic fiberboard. The ceramic
fiber in the door or lid is energy
efficient and forms a tight seal between
the opening and body of the kiln. Top
loading electric kiln walls and floors
are constructed of brick and board
insulation, and modern pyro-brick modules
comprise the easy opening counter-sprung
lid.
Floor elements when selected as an
option are controlled by infinite switches
and can be adjusted by the kiln operator
as needed. All commercial electric
kilns are equipped with heavy gauge
elements for long life. Industrial
relays insure quiet operation and long-life
and the commercial electrical boxes
are hinged and simplify kiln maintenance.
Custom kilns quoted upon request.
If you are interested in this kiln you may want to see our special SHEFFIELD POTTERY OLYMPIC FRONT LOADER KILN PACKAGES which are this same line of kilns packaged for a special low price with these options :
-
6.5 inches total insulation: 4.5” Brick walls, 1” Air, 1” Insulating Board.
-
Dual zone electronic controller
-
Two thermocouples with protection tubes
-
Orton Kiln mount ventilation system, installed on kiln.
-
Stainless Steel exterior
-
Door and Floor Elements
-
Furniture Kit includes shelves and posts for four layers
-
Temperature Range: 0-2350˚F (cone 10)


|
|
Olympic FL Series Front Loading Commercial Kilns
|
|
|