OLYMPIC Kilns GLASS FUSING KILN
Model - 146GFETLC
OLYMPIC KILN Model - 146GFETLC/120v
glass fusing equipped with electronic
controller, top and clamshell
Inside dimensions: 14 ½ " wide
x 6 " deep, fires to 1700° F
Model comes with attached tall
Note "SET UP COST" $60 Is a required Olympic Crating Charge for any of their Clamshell Design Models
The Alpha, The Original - 14" Square 120 volt Glass Fusing Kiln!
Model - Square 146GFETLC - 120 volt
Inside Dimenisons: 14.5" x 14.5" wide x 6" deep, fires to 1700°F
The first square 14" glass kiln is built with ample space for large 10" pieces and is like getting two kilns in one! The Square 146GFETLC is top loading and clamshell loading kiln and runs on 120 volts!
Two kilns in one! The Square 146GFETLC is a top loading and clamshell loading kiln! You get the standard top loading model plus the clamshell loading which makes flash venting, glass raking and loading shelves with glass positioned easy and convenient.
Glass firing kilns are used for fusing and forming of glass shapes, precious metal clay and heat-treating. 120 volt glass fusing and precious metal clay models are equipped with a lid element for the fusing segment of the glass firing and a body element for the ramping up and down and annealing segments of the firing. A selector switch is on the electrical box to designate either the lid or body element to heat during the firing. Only one of the elements can be used at a time because of the limited power of 120 volts. If the selector switch remains in the neutral position, neither element will heat. Models come equipped with pilot light, 18" tall metal stand or frame, stainless steel jacket, and Bartlett Instruments 3 Key electronic controller. Controller data is entered by scrolling through the up and down arrows for the desired ramp-hold programming. Model comes with attached tall frame, peephole plug, lid wedge, instruction manual, and warranty card. Two-year warranty.
Upgrade to the Genesis touchscreen controller or the 12 key digital RTC-1000 controller for more ramp-hold user programs and multiple features including delay start, preheat, skip step and many more for precise firings every time. Messages and Information are available for reviewing a firing profile before or during the firing, and for viewing the current segment the firing is in. Other options include the lid lift assist, which makes it easy to open and close heavy kiln lids, bead door, quartz glass viewing window, Type S thermocouple, vent and much more!
Optional Furniture Kits for 120 volt glass fusing and PMC kilns include 2 layers of shelving for stacking wares, assorted square posts, ceramic paper and a one pound bag of kiln wash.