Home > Slab Rollers Clay Mixers, Extruders, Pugmills, and Ball Mills > North Star Clay Extruders > Dies and Die Sets for North Star Clay Extruders >

North Star Equipment #3 Tile Accessory 7 Piece Die Set


North Star Equipment #3 Tile Accessory 7 Piece Die Set


 
Our Price: $119.99


Product Code: NS925DS3
Qty:

Description
 

North Star Equipment #3 Tile Accessory 7 Piece Die Set


North Star Extruder Tile Die setNorth Star Equipment #3 Tile Accessory 7 Piece Die Set for 4" Extruder
DS3A - 1 3/4"x11/16" Fancy Flat Top Bar
DS3B - 1"x7/8" Round Top Trim
DS3C - 7/8"x1/2" Concave Top Trim
DS3D - 3/4"x5/8" Concave Top Trim
DS3E - 1 3/4"x3/4" Scalloped Top Bar
DS3F - 2 1/2"x1" Fancy Convex bar
DS3G - 2 7/8"x1 1/2" Fancy Hollow Dome

1/2" Thick HDPE Polyethylene Plastic Dies. No Rusting or Oxidation. CNC Machined for Exact Shapes & Sizes.

The 4" extruder dies are made of 1/2" HDPE (High Density polyethylene). Which is extremely wear-resistant and completely non-contaminating. The top edge of the die cavity is beveled to compact the clay as it passes through, giving a crisp, more solid extrusion. In the hollow dies, there is a bevel on both the interior and exterior portions under each side of the bracket (which holds the center of the hollow dies) that helps the extrusion to "heal" after is has been cut apart by the bracket. This bracket fits into a slot machined into the top of the hollow die and is held in place by the barrel of the extruder. If a hollow die is mounted in place, the center part of the die is in exactly the right place and the wall thickness will automatically be even all the way around. In general, the walls of extrusions 3-1/2 inches OD or less are 1/4 inch thick, while larger pieces have 5/16 inch walls.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Slab Rollers Clay Mixers, Extruders, Pugmills, and Ball Mills > North Star Clay Extruders > Dies and Die Sets for North Star Clay Extruders