Home > Slab Rollers Clay Mixers, Extruders, Pugmills, and Ball Mills > North Star Clay Extruders > Dies and Die Sets for North Star Clay Extruders >

North Star Equipment 4 Geometric Shapes Extruder Die


North Star Equipment 4-CAVITY GEOMETRIC SHAPES DIE for STANDARD EXTRUDER


 
Our Price: $44.99


Product Code: NS925GS
Qty:

Description
 

North Star Equipment 4 Geometric Shapes Extruder Die with Mask


Extrudes 1” solid octagon, 1” star, 1” triangle and 1 1/4” oval, all solid. Requires Die Mask 925DM, which is included with die.

The 4" extruder dies are made of 1/2" HDPE (High Density polyethylene). Which is extremely wear-resistant and completely non-contaminating. The top edge of the die cavity is beveled to compact the clay as it passes through, giving a crisp, more solid extrusion. In the hollow dies, there is a bevel on both the interior and exterior portions under each side of the bracket (which holds the center of the hollow dies) that helps the extrusion to "heal" after is has been cut apart by the bracket. This bracket fits into a slot machined into the top of the hollow die and is held in place by the barrel of the extruder. If a hollow die is mounted in place, the center part of the die is in exactly the right place and the wall thickness will automatically be even all the way around. In general, the walls of extrusions 3-1/2 inches OD or less are 1/4 inch thick, while larger pieces have 5/16 inch walls

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Slab Rollers Clay Mixers, Extruders, Pugmills, and Ball Mills > North Star Clay Extruders > Dies and Die Sets for North Star Clay Extruders