Home > Slab Rollers Clay Mixers, Extruders, Pugmills, and Ball Mills > North Star Clay Extruders > Dies and Die Sets for North Star Clay Extruders >

North Star Equipment #8 Double Rope Handles Die Set


North Star Equipment #8 Double Rope Handles Die Set
North Star Equipment #8 Double Rope Handles Die Set


 
Our Price: $94.99


Product Code: NS925DS8
Qty:

Description
 

NORTH STAR EQUIPMENT #8 Double Rope Handles Die Set:


North Star Equipment #8 Double Rope Handles Die SetIncludes:
DS8A - 1" Handle
DS8B -1 1/4" Handle
DS8C - 1 7/8" Handlee

3 dies, 1/2, 3/4 and 1" All solid. For Standard and Stainless Extruders.
The 4" extruder dies are made of 1/2" HDPE (High Density polyethylene). Which is extremely wear-resistant and completely non-contaminating. The top edge of the die cavity is beveled to compact the clay as it passes through, giving a crisp, more solid extrusion. In the hollow dies, there is a bevel on both the interior and exterior portions under each side of the bracket (which holds the center of the hollow dies) that helps the extrusion to "heal" after is has been cut apart by the bracket. This bracket fits into a slot machined into the top of the hollow die and is held in place by the barrel of the extruder. If a hollow die is mounted in place, the center part of the die is in exactly the right place and the wall thickness will automatically be even all the way around. In general, the walls of extrusions 3-1/2 inches OD or less are 1/4 inch thick, while larger pieces have 5/16 inch walls.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Slab Rollers Clay Mixers, Extruders, Pugmills, and Ball Mills > North Star Clay Extruders > Dies and Die Sets for North Star Clay Extruders