 |
 |
 |
 |
NOTE Current lead time approximately 25 weeksLehman BP24 / BP30 Slip-o-Matic Heavy Duty, Commercial grade Slip Casting Pump
BP24 Dimensions: 24" Depth
BP30 Dimensions: 30" Depth
Description: Slip-O-Matic™ centrifugal slip pump, in either 24" or 30" depth
The drive assembly of the Lehman Slip-O-Matic™ Centrifugal pump is what we refer to as the bearing assembly, and it has no bearings or moving seals exposed to the liquid. We use this unique assembly to
drive several different types of pumping systems. The original unit was
a
centrifugal design with a housing and impeller. A
four-leg tower is used to suspend the housing, and the impeller is
fastened to the
shaft.
Regardless of the shaft size used, the hole in the top of the
housing is slightly larger and no bearing or seal is used at this point.
As a result, the pump can be run either in or out of the
liquid with no wear or damage to the system. While this pump is not
cheap to
build, there is nothing available that compares to its
quality and durability. We back up that claim with a full two year
warranty.
Also, since the pump is actually suspended in the slip, the rotating
drive assembly creates mixing action in the tank although this does not function as a slip mixer. And by building
different sizes of the same design, the pump can be made
to meet the volume needs of various requirements and situations.
This same pump has been used in bulk
delivery units that can use either electric, hydraulic or gas engine
power.
|
|
 |
 |
 |
 |

|