Home > Kilns > L&L Kilns > L&L Jupiter Series Kilns >

L&L JD2936-3 - Jupiter Kiln 3" Brick : 28 x 36"

L&L Kilns JD2936-3 Jupiter Kiln


 
List Price: $9,295.00
Our Price: $7,519.00
You save $1,776.00!

Price with Selected Options: $7,519.00
Item Class Pottery Kilns



Product Code: LKJD29363

L & L Kilns Voltage

L&L 208 / 3 Phase
L&L 208 /Single Phase
L&L 240 / 3 Phase
L&L 240 / Single Phase
L&L 480 Volt : Not UL Listed [Add $1,090.00]
L&L 480 Volt : UL Listed [Add $1,090.00]
Options: Use Check Boxes and Hit Update Price

L&L Furniture Kit: 		L&L JD2936-3 Add Furniture Kit [Add $799.00]
L&L Genesis Touch Screen

L&L 12 Key Dynatrol instead of Genesis
L&L Pull Apart System

L&L Hinged Lid
L&L Pull-Apart Lid
Pull-Apart Lid with Light Duty Hinge
L&L Jupiter/DaVinci Powered Bottom

L&L Jupiter/DaVinci Powered Bottom: 		L&L Add a Powered Bottom To J29 Series [Add $825.00]
L&L Quad Elements

L&L JD2936-3 Add Quad Elements Upgrade [Add $860.00]
L&L S-Thermo 4 Ring Kilns

L&L Upgrade to S-type Thermocouple 4 ring kiln [Add $1,400.00]
L&L Vent Sure

L&L Vent-Sure Kiln Vent System [Add $599.00]
L&L Solid State Relay System

L&L SSR Option for 4 Zone Kilns [Add $2,350.00]
L&L Vent Control

Add Integrated Vent Control : (for Genesis or Dynatrol only) [Add $190.00]
L&L Rolling Stand Vent Pipe

Needed in Order to Use Your L&L Vent if You Want Rolling Stand [Add $94.00]
Remote Freight

MT, WA and OR Freight*: 		Washington State + Oregon Freight Surcharge L3 [Add $550.00]
I am not in either of these states
NY City, Long Island, FL, Texas Freight

NY City, Long Island, Texas Freight*: 		I am not in any of these these states
NYC, LI, FL, Texas, WVFreight Charge L2 [Add $174.99]
Western States Freight

CA, NV, AZ, ID, MT, WY, UT, CO, NM Freight Charge L3 [Add $329.00]
I am not in any of these states
Lift Gate Delivery

Lift Gate Delivery : Truck will get equipment to the ground [Add $35.00]
Lift Gate Delivery Not Needed: I Have Loading Dock or Forklift

Qty:  
Description
 

L&L JD2936-3 - Jupiter Kiln 3" Brick : 28 x 36"

L&L Kilns JD2936-3 Jupiter Kiln is a customizable pottery and ceramics kiln. Jupiter kilns are professional grade and are free shipping from Sheffield Pottery.

This is a large 3 section model
It is 28" across and 36" deep for 13.6 cubic feet!
Electrical:
At 240 or 208 / Single Phase : requires 100 amp Breaker
At 240 or 208 / 3 Phase requires 70 amp breaker.
Direct Wire : Does not include power cord.
Ship Weight : 585 lbs Kiln alone / 750 lbs with Furniture Kit


Features of L&L Jupiter JD Series Kilns

Reversible Bottom
Dynamic zone control
Most models and voltages Cone 10
Add and remove sections
Hard Ceramic Element Holders

Options

FURNITURE KIT Includes Cone 11 full shelves and half shelves as listed below plus a post kit which includes six each 1/2”, 1”, 2”, 4”, 6” and 8” high 1-1/2” square cordierite posts plus heat-resistant gloves
VentSure : Down-draft kiln vent: 130 CFM downdraft vent pulls air down to bottom of kiln to improve temperature uniformity and vent corrosive fumes. Bypass collection box mounted on kiln allows adjustment of venting. Fan motor, mounted away from the kilns, stays cool and no vibration is transmitted to the kiln. Now includes multi-mounting bracket
Quad Element Option: Four rows of elements for each 9” kiln section. Maximum element life for constant high-firing.
Solid State Relays : Super long lasting : may never need replacing
Type S Thermocouples : For firing to precise set points
PULL-APART OPTION FOR SCULPTURE Any Jupiter or DaVinci kiln can be made with the Pull-Apart Option. Includes floor mount stand for control panel, lift off lid with extra handles but no hinge.
This option allows the entire kiln to be dismantled to make it easy to load large sculptural pieces. The kiln sections are unplugged and then taken off one at a time.


Browse for more products in the same category as this item:

Kilns > L&L Kilns > L&L Jupiter Series Kilns
Kilns > L&L Kilns