Evenheat Glass Kiln GTS 41
Available with Solid State Quiet Drive relays
The GTS 41 is Evenheat's largest top loading glass kiln. The firing chamber dimensions exactly match the Studio Pro 41 to give you a large, uninterrupted firing surface.
The lid on the GTS 41 is constructed of fiber for lightweight and fast operation. heating elements are surface mounted for maximum heat transfer and efficiency.
Evenheat Glass Kiln GTS 41 Specifications
Chamber Dimensions : 25.25" Long x 40.5" Wide x 13.5" Deep - 7.52 Cubic Feet
(64.1cm Long x 102.9cm Wide x 34.3cm Deep - 213L)
Outer Dimensions 30.25" Long x 56" Wide x 29.5" High (includes the 8" stand)
(77cm Deep x 142cm Wide x 75cm High)
Maximum Temperature 1800°F (982°C)
Electrical 240 Volts, 45 Amps, 10,800 Watts, 60Hz, Single Phase
Power Cord Plug Configuration- NEMA 6-50
Note: Consult with an electrician for proper fuse panel, service wire size, receptacle, and fusing requirements. This model, used for its intended and expected purpose, would not be defined as "continuous use". Continuous use is defined as continuous, full power on for 3+ hours.
Model is available in 200V, 208V, 220V and 230V
Model will operate properly on both 50Hz and 60Hz
Model is available in 3 phase Delta and Y (380V, 400V and 415V) designs
Shipping Weight 365lb. (166Kg) - Approx.
Shipping Method Freight Truck
NRTL Agency Listing TUV Listed United States and Canada - Designed and Tested to CSA & U/L 499
Studio Pro models may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
EVENHEAT GTS 41 FEATURES
Access Port (Pat. Pend.)
The GTS 41 Evenheat glass kiln incorporates the new relay access port (Pat. Pend.) for simple, no-panel-off relay replacement.
Simply remove the plate to gain access to the service part. There's
no need to remove or swing the entire control panel out of the way and
dig into the internal wiring. It's absolutely simple and effective and
all it takes is a simple screwdriver!
Dyna-Lift Lid Lift Assist
The No Damage Lift Assist
Evenheat is proud to offer our patented Dyna-Lift lid lift assist for our large kiln for sale. (Patent No. 7,984,822)
The Dyna-Lift lightens the force needed to operate the kiln lid. It does so with ease and grace and with no negative effects upon the top loading kiln itself. Hallmarks of the design include no kiln body connection, single
point lifting and emphasis on allowing the lid to act naturally.
The Dyna-Lift Lid Lift Assist is the best designed, best performing lift assist available.
Multiple Control Options
Evenheat works closely with control manufacturers Bartlett
Instruments and SDS Industries to bring you the best in performance,
features and programming ease.
Control Options Include:
TAP Touchscreen, full featured touchscreen control with user-defined
and preset programs for glass, metal clay and ceramic. Also features
full-text graphics, cost per firing, and graphing along with wi-fi
compatibility with web and mobile apps and more.
Rampmaster 3 (RM3), full featured control with user-defined and preset programs for glass. Features a 4 digit display.
Economical Set-Pro, 3 button control with user-defined and preset
programs for glass, metal clay and ceramic. Features a 4 digit display.
Swing View Adjustable Control
The Swing View Adjustable Control is a pivoting, swing-up
enclosure that allows the user to rotate the Rampmaster control to a
comfortable viewing and programming angle. It's that simple. You're
going to really enjoy this feature. The Swing View Adjustable Control is
stock equipped on all GTS 41's with Rampmaster control.
Wide Lid Handle
At Evenheat we love handles, we always have. Our wide lid handle
illustrates this affection by offering a wide handle that's corner
mounted and easy to operate, even with the gloved hand. It's unlike any
other and it's a joy to use
Full Stainless Jacket
Multi-section kilns are designed to lower production costs for
the kiln manufacturer. it is a worthy goal but it comes at the cost of
kiln quality. It's a trade off we're not willing to make. We build our
kilns with full stainless jackets from top to bottom. We build our Evenheat glass kilns with full stainless jackets from top to bottom. Full jackets mean absolutely solid, life extending construction. There are no leaks, no
shifting, no buckles and no weakness. Insist on Full Stainless Jackets
for true build quality.
Corner Mounting Technique
The corners of the kiln body and lid provide excellent strength
for mounting. The flat sides of the kiln don't offer this strength,
especially on oval shaped kilns. We install our load bearing hinge and
lid handle brackets on these corners for this reason. Longer life, high reliability: solid design makes a difference with this large kiln for sale.
Properly Sized Stands
We don't design our stands to fit into our kilns for shipping.
We design our stands to support our kilns in use. Our stands properly
distribute the weight of the kiln and are made wide to prevent tipping
or offsetting. You won't find our stands in our kilns but you'll be
happy to know they're beneath them.
3 Position Lid Vent Option
The lightweight lid created by the Dyna-Lift option allows us to
offer a 3 position lid vent system. Lid venting helps remove burn-off
from adhesives and paints and comes in handy during the cooling process.
The 3 position lid vent is only available when used with the OPTIONAL Dyna-Lift. It is not a standard feature.
The GTS 41 is a large kiln that fits well into private
and commercial studio's. Those needing space for volume firing or want
to keep their options open on piece size will appreciate the GTS 41.
Lid Security Bar Option
Dyna-Lift equipped kilns are provided with a lid prop bar that
positively keeps the lid in the open position. Simple one handed
operation is made even easier with our well designed lid handle.
The Lid Security Bar is only available when used with the OPTIONAL Dyna-Lift. It is not a standard feature.
Top and Side Fire Configuration
Evenheat pioneered the top and side fire glass kiln design. Top
fire is essential in glass firing as it heats the glass surface
uniformly. The addition of side fire provides heat to the lower portion
of the kiln which helps to reduce and eliminate bubbles.