Standard Vent-A-Kiln pre-engineered systems are available to
ventilate round, octagonal, or any other shape kilns. All systems have a one-year warranty and are furnished complete with:
Circular Aluminum Hood
Fan/Blower
Overhead Counter-weight Pulley System
10 feet of Flexible Exhaust Hose and all necessary Clamps
Externally-mounted Louvered Discharge Plate
Longest Exterior
Kiln Dimension (OD)
Hood
Diameter
Hood
Height
Model
No.
19 to 23 inches
27-in.
5-in.
1227 or 1227/500
24 to 28 inches
32-in.
6-in.
1332 or 1332/500
29 to 33 inches
37-in.
7-1/4-in.
1437 or 1437/500
34 to 40 inches
44-in.
7-1/4-in.
1544
41 to 50 inches
54-in.
12-in.
1654
Vent-A-Kiln captures and removes unpleasant fumes, odors, and heat from kilns. It is a close-capture fume system designed for low CFM and static pressure applications. Standard and custom models are available for use in schools and in other educational or commercial facilities by professionals and hobbyists alike.
OVERHEAD COUNTERWEIGHT PULLEY SYSTEM -
Features Include: Spun Aluminum hood, fan motor (115V) , 6' cord and plug, hood, convenient
overhead counterweight pulley system, venting kit with 10' of 5" hose
on 265 CFM & 121/2' of 6" hose on 500 CFM, all clamps, and external
mounting plates for discharge.
Hood positioned above and close to a kiln to capture natural, upward
flow of air & fumes. Available in both positive and negative
pressure systems. No upsetting of a kiln's firing balance by the
removal of heat from inside the kiln. No cold spots within the kiln to
interfere with firing process. No motor vibration to disturb kiln
during firing - Vent-a-kiln never comes in contact with kiln. No
delayed heat up time or reduction in firing temperature capability. No
modification of kiln is required. Vent-a-kiln is covered by a full 1
year warranty. For use on installations with moderate overhead ceiling
heights of 8' to 12'.
For higher ceilings use the swinging wall bracket accessory.