Opulence Glaze in liquid pints have been enhanced for better brushability!
We have two types of C/6 glazes: dry glaze manufactured for dipping-
in 5 lbs. and 25 lbs. packages or in liquid pints that are now enhanced
for better brushability.
New Directions for BRUSHING Opulence Glaze Liquid Pints:
PLEASE READ: Brush 2-3 coats on C/06-04 Bisque. For best results, use
a soft fan brush. When layering two different Opulence Glazes, use only
2-3 coats TOTAL to avoid over application. The brushable liquid pints
can be modified for dipping/pouring by adding 2 capfuls of water and
shaking well before using. Allow to dry thoroughly before glaze firing
to C/6.
Mixing Instructions and Helpful Hints for DRY glazes, manufactured for dipping:
Translucent Glazes- Numbered 900-999
Mixing: 5 lbs. mix with 4.5 lbs. of water. Sieve through 80 mesh
screen. 25 lbs. mix with 22.5 lbs. of water. Sieve through 80 mesh
screen. Suggested specific gravity 150-152
To determine if Opulnce Dipping Glaze is correct water to dry glaze
ratio, you can measure the specific gravity. This method is helpful if
the glaze has been sitting for an extended period of time or if you are
concerned the glaze has become too thick or thin. Specific gravity is
found by the weight of mixed water and glaze.
Conversion Information
5 lbs. of glaze- 4.5 lbs. of water can be converted into liquid
measurement into any of these quantities: 72 ounces, 9 cups, or 4.5
pints
25 lbs. of glaze- 22.5 lbs. of water can be converted into liquid
measurement into any of these quantities: 360 ounces, 45 cups, 22.5
pints, or 2.8 gallons