Home > Kilns > L&L Kilns > Doll-Baby Series Test Kilns >

L&L DLH11-D Doll Baby Kiln Cone 6 with 12 Key Dynatrol Control


L&L DLH11-D Doll Baby Kiln Cone 6 : with 12 Key Dynatrol  Control
L&L DLH11-D Doll Baby Kiln Cone 6 : Automatic W/ Dynatrol


 
L&L DLH11-D Doll Baby Kiln Cone 6 : Automatic W/ Dynatrol
List Price: $1,488.00
Our Price:
$1,650.00

Price with Selected Options: $1,650.00
Item Class Pottery Kilns


Product Code: LKDDLH11D

L & L Kilns Voltage

120 / Single Phase
L&L 208 /Single Phase
L&L 240 / Single Phase
L&L Furniture Kit

L&L Furniture Kit for Doll/Test Kiln [Add $140.00]
L&L Genesis Touch Screen

L&L Genesis Touch Screen Controller Upgrade [Add $200.00]
Voltage

L&L 120 volt
L&L 240 volt
L&L 208 volt
L&L Vent Sure

L&L Vent-Sure Kiln Vent System [Add $549.00]
L&L Vent Control

Add Integrated Vent Control : (for Genesis or Dynatrol only: Not compatible with Smart 3 Key) [Add $170.00]
Western States Freight

WA, OR, CA, NV, AZ, ID, MT, WY, UT, CO, NM Freight Charge L1 [Add $149.00]
Lift Gate Delivery

Lift Gate Delivery : Truck will get equipment to the ground [Add $35.00]
Lift Gate Delivery Not Needed: I Have Loading Dock or Forklift

Qty:  
Description PRODUCT VIDEOS
 

L&L DLH11-D Doll Baby Kiln Cone 6 with 12 Key Dynatrol

L & L Kilns Doll-Baby Series Test Kilns are great little kilns that pack a big punch.

L&L doll baby kiln with 12 key controllerModel DL11-D Doll/Test Kiln with a DynaTrol Controller.
120 volts, 18 amps. Cone 6. Includes NEMA 5-20 plug.
C-MET-us listed in the USA & Canada.

Kiln comes with hard ceramic element holders, thermocouple protection tube, strong solid-top stand, and solid peephole plug.
11" Diam x 9" High (0.5 cu ft). .
2-1/2" (63 mm) K23 Premium Firebrick
Top-Loading
One section
6 sides
0.5 cubic ft (14 Liters)
105 pounds (47 Kg)
11" Diam x 9" High
19" Wide x 25" Deep x 22" High
48.3 cm Wide x 63.5 cm Deep x 55.9 cm High

  • Amps: 18 Use 25 amp breaker
  • Wire Connection: 5-20P Plug
  • Wire Gauge for Connection: 12 Ga
  • Branch Fusing: Not Branch Fused
  • Element Wiring: Series
  • Max Temperature: Cone 6, 2230F, 1220C
One 9” high section sits on a bottom. The kiln is very easy to assemble and disassemble.
Stainless steel wrapped around shaped firebrick. There are three adjustable clamps welded to each casing. All assembly is with stainless steel screws. The kiln sections sit on a separate stand.
Simple strong hinge with chain for door support
Heavy-duty 14 gauge full solid stand with multiple bends for strength. Legs bolt on with heavy 1/4-20 stainless bolts. The metal is aluminized for good corrosion resistance.
A proprietary brick coating is applied to all interior surfaces of the kiln. This is put on before the element holders are inserted. This coating penetrates the firebrick and fuses the surface on a microscopic level which helps prevent dusting and crumbling of the fragile firebrick.
One solid ceramic peephole plug with full 1” diameter.


Accessories for this product...
L&L Vent-Sure Kiln Vent System
Our Price:
$549.00

Add
VENT-SURE KILN VENTING SYSTEM


Browse for more products in the same category as this item:

Kilns > L&L Kilns > Doll-Baby Series Test Kilns
Kilns > Small Test Kilns | PMC Kilns
Kilns > L&L Kilns
Kilns