Paragon Kilns PMT-21 Heat Treating Furnace
Paragon PMT-21 Heat Treating Furnace
Machine shops save time with a furnace at their disposal in their own shop. You will no longer send a die out for heat treating, wait for its return and then send it out again for additional heat treating.
Solid construction
The door swings open with one-handed operation.
The PMT-21 furnace is insulated with refractory firebrick. The elements are mounted in dropped, recessed grooves machined into the firebrick. Paragon invented this type of groove in 1952. This groove protects the element for long life and low maintenance. Elements are simple to replace because they’re exposed rather than embedded. You can thread new elements into place following clear instructions in the manual.
The firing chamber is protected by a steel case painted in high temperature blue. A built-in stand lifts the firing chamber safely off your worktable, so no extra stand is needed. The door is mounted with a heavy-duty hinge for smooth opening. A micro-switch shuts off the power to the elements when the door is opened. We use high temperature wire in the switch box for long life.
A heat shield, mounted between the switch box and furnace, helps keep the switch box components cool even during extended operation. To further dissipate heat, the switch box is extra large and generously louvered.
Each furnace comes with a cord and plug for immediate installation and a one year warranty.
Complete instructions
:
Your furnace includes a wiring diagram, programming instructions, and heat treating manual. The manual gives you basic heat treating instructions for D2, 440C, ATS 34 and 154 CM. The manual is written in plain English for the beginner.
Optional Gas Injection Flow Meter
During heat treating, scale forms on the surface of the steel. One way to eliminate most scaling is to wrap the steel in stainless steel foil. An easier way is to install the gas injection flow meter on your furnace. It is available as either an add-on kit, or you can order the furnace with the meter installed.
The meter regulates the flow of an inert gas, such as argon, inside the furnace. The gas displaces the oxygen to prevent most scaling.
Designed for production :
Paragon’s warranty is not affected by frequency of use. Fire your new kiln every day if you want, even in commercial settings. That will have no effect on the warranty period.
Specifications
Max. Temperature |
2350F 1287C |
Amps |
40 |
Phase |
1 |
Watts |
9600 |
Nema |
6-50R |
Breaker Size |
50 |
Circuit Copper Wire Size |
6 gauge |
TUV tested to CSA and UL Standard 499 |
N |
CE |
N |
IMPORTANT: Some areas such as Canada and Europe require a lid or door safety switch on kilns.
|
Control Type |
Sentry Digital 12-key Non-Ceramic
|
Voltage |
240 |
Hertz |
60 |
Nema Details |
|
Disclaimer: The specifications above assume that the kiln
will be plugged into a dedicated circuit. Local electric codes supersede
our recommendations.
The pricing and electrical specifications for the above products
reflect their design for use in the United States. The International
versions of most models will have variations in electrical
specifications and price due to consumer safety requirements or
electrical regulations.
|
Kiln Type
Front Loading Square
Sides
4
Understanding Chamber Measurements
Chamber Volume
3.30 CU.FT.
Chamber Width
21.00 IN
Chamber Depth
21.00 IN
Chamber Height
13.00 IN
The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom
Outer Size
40.00W x 35.00D x 28.00H Inches
1016W x 889D x 711H mm
Ship Size
44.00W x 39.00D x 32.00H Inches
1118W x 991D x 813H mm
Ship Weight
424.00 Lbs.
192.33 Kg.
Ship Method & Notations
This Kiln Ships Via Truck
Part Number
PMT21 * Base Model