Paragon GL-18ADTSD Glass Fusing Kiln
Glass Fusing
Paragon GL-18ADTSD Glass Fusing Kiln
This is like the GL18AD but it has AD has just roof elements and this has Top, Sides and Door elements.
The Paragon GL-18ADTSD glass fusing kiln fires from the top, three sides, and door for unsurpassed heat distribution. Use the kiln’s side heat for taller projects such as drop-out vases sagged through a ring mold. Side elements, seated in dropped, recessed brick grooves, span the three walls.
The Paragon GL-18ADTSD glass fusing kiln is equipped with the standard Sentry controller.
The kiln is available, however, with advanced power ratio technology at no extra charge. Pioneered by Paragon, power ratio balances the heat between top and side/door elements. Program the digital controller to balance the heat between the top and sides in increments of 10%. (i.e., 100% top - 0% sides, 50% top - 50% sides, 80% top – 20% sides, etc.) Set the heat balance for any combination desired between the top and sides so that the total heat output equals 100%. The power ratio of the Paragon GL-18ADTSD glass fusing kiln requires more amperage than the standard model. If you want the power ratio option, be sure to specify it at the time you place your order.
Optional Mercury Relays
Order your new kiln with the mercury relay upgrade. The mercury relay is quiet and reliable. The life of a mercury relay has been measured in millions of on/off cycles. Mercury relays outlast the standard mechanical relays and are available as an option on new kilns.
The Paragon GL-18ADTSD glass fusing kiln is 13” high inside with room to bend glass for curved windows or cabinet doors and to repair lampshades. Make glass-fused platters. Crack the door to rake or emboss designs in the glass. Make small-to-medium sized castings and pâte de verre.
Engineered for Reliability
Paragon’s GL-series are made for years of rigorous firing, as artists all over America can attest. The insulating firebrick, wrapped in heavy-gauge steel, soak up heat for slow, efficient cooling. A double heat shield and air gap between the kiln and ventilated switch box help keep electrical components cool for long, trouble-free service. Costly heavy-gauge nickel-plated copper wiring is covered with high temperature glass-braided insulation. The thermocouple, which senses temperature inside the kiln, is protected with a high-nickel stainless steel sheath for long life.
The GL-series lid elements use an element groove that eliminates element pins. The element coils are wider than the groove opening, so the elements stay in place without pins.
The spring-pressure latch and a ˝" recess around the edge of the firebrick door keep the door tightly closed. The door remains rock-steady on a heavy hinge shaft. Four hand lifts aid moving. The base is open in the back and slotted to dissipate heat.
Watch the red-hot glass through two tapered peepholes, drilled one above the other in the wall opposite the switch box. Peephole plugs are included. (Most GL-18 models are drilled for peepholes. However, some international models have no peepholes unless you specify them at the time that you order the kiln.)
Imagine the glass you could sag, slump, and fuse with this kiln. Make small bowls, pendants, earrings, cufflinks, and even bracelets. Enjoy the glittering beauty of dichroics. Make treasured gifts. When you own a Paragon kiln, you can experiment with new glass ideas to your heart’s content.
Becky Johnson, a glass teacher in Dallas, Texas, describes the excitement of a kiln: “I like to open the kiln with my students so that we can review and admire each other’s treasures together. The transformation of the glass inside the kiln is magical and mystical. It changes from pieces of arranged cut glass to awe-inspiring art. To be some part of that process is a true gift.”
Digital Accuracy
You will be amazed at the convenience of digital firing. The reliable solid-state Sentry controller continually monitors the firing so you can spend your time productively without closely watching the kiln. (Please remember, however, to check the kiln during firing and to monitor it near the expected shutoff time.) The sealed touch pad keeps out dust and is easy to wipe clean.
Paragon’s innovative controller will help you achieve consistent results from one firing to the next. The controller has powerful features that you will enjoy using. Yet we have also worked hard to make the controller user-friendly.
Do you ever wonder how much electricity your kiln uses? The digital controller can figure this for you with the press of a button. Find out how little a kiln actually costs to fire.
The GL-18ADTSD has a durable high temperature, water-base finish. We use water-base paint because of the low emissions during spraying. This creates a safer working environment for our employees and cuts down on pollution.
Customer Service
At Paragon, phone calls that we receive during business hours are answered by a live person at the factory. We are here to help you long after the sale should you ever need it.
Optional Ceramic Fiber Top
The standard GL-series kiln comes with an insulating firebrick top, grooved for heating elements. The upgrade option is a ceramic fiber top with element grooves. The fiber top helps keep the glass clean during firing.
Optional Kiln Stand
The heavy-duty GL-series stand raises your GL-18, GL-22 or GL-24 kiln to a convenient working height. Begin operating your new kiln without having to find a table strong enough to support over 300 pounds. The table is 147 pounds of rock solid construction.
Paragon GL-18ADTSD Glass Fusing Kiln
This is like the GL18AD but it has AD has just roof elements and this has Top, Sides and Door elements.
The Paragon GL-18ADTSD glass fusing kiln fires from the top, three sides, and door for unsurpassed heat distribution. Use the kiln’s side heat for taller projects such as drop-out vases sagged through a ring mold. Side elements, seated in dropped, recessed brick grooves, span the three walls.
The Paragon GL-18ADTSD glass fusing kiln is equipped with the standard Sentry controller.
The kiln is available, however, with advanced power ratio technology at no extra charge. Pioneered by Paragon, power ratio balances the heat between top and side/door elements. Program the digital controller to balance the heat between the top and sides in increments of 10%. (i.e., 100% top - 0% sides, 50% top - 50% sides, 80% top – 20% sides, etc.) Set the heat balance for any combination desired between the top and sides so that the total heat output equals 100%. The power ratio of the Paragon GL-18ADTSD glass fusing kiln requires more amperage than the standard model. If you want the power ratio option, be sure to specify it at the time you place your order.
Optional Mercury Relays
Order your new kiln with the mercury relay upgrade. The mercury relay is quiet and reliable. The life of a mercury relay has been measured in millions of on/off cycles. Mercury relays outlast the standard mechanical relays and are available as an option on new kilns.
The Paragon GL-18ADTSD glass fusing kiln is 13” high inside with room to bend glass for curved windows or cabinet doors and to repair lampshades. Make glass-fused platters. Crack the door to rake or emboss designs in the glass. Make small-to-medium sized castings and pâte de verre.
Engineered for Reliability
Paragon’s GL-series are made for years of rigorous firing, as artists all over America can attest. The insulating firebrick, wrapped in heavy-gauge steel, soak up heat for slow, efficient cooling. A double heat shield and air gap between the kiln and ventilated switch box help keep electrical components cool for long, trouble-free service. Costly heavy-gauge nickel-plated copper wiring is covered with high temperature glass-braided insulation. The thermocouple, which senses temperature inside the kiln, is protected with a high-nickel stainless steel sheath for long life.
The GL-series lid elements use an element groove that eliminates element pins. The element coils are wider than the groove opening, so the elements stay in place without pins.
The spring-pressure latch and a ˝" recess around the edge of the firebrick door keep the door tightly closed. The door remains rock-steady on a heavy hinge shaft. Four hand lifts aid moving. The base is open in the back and slotted to dissipate heat.
Watch the red-hot glass through two tapered peepholes, drilled one above the other in the wall opposite the switch box. Peephole plugs are included. (Most GL-18 models are drilled for peepholes. However, some international models have no peepholes unless you specify them at the time that you order the kiln.)
Imagine the glass you could sag, slump, and fuse with this kiln. Make small bowls, pendants, earrings, cufflinks, and even bracelets. Enjoy the glittering beauty of dichroics. Make treasured gifts. When you own a Paragon kiln, you can experiment with new glass ideas to your heart’s content.
Becky Johnson, a glass teacher in Dallas, Texas, describes the excitement of a kiln: “I like to open the kiln with my students so that we can review and admire each other’s treasures together. The transformation of the glass inside the kiln is magical and mystical. It changes from pieces of arranged cut glass to awe-inspiring art. To be some part of that process is a true gift.”
Digital Accuracy
You will be amazed at the convenience of digital firing. The reliable solid-state Sentry controller continually monitors the firing so you can spend your time productively without closely watching the kiln. (Please remember, however, to check the kiln during firing and to monitor it near the expected shutoff time.) The sealed touch pad keeps out dust and is easy to wipe clean.
Paragon’s innovative controller will help you achieve consistent results from one firing to the next. The controller has powerful features that you will enjoy using. Yet we have also worked hard to make the controller user-friendly.
Do you ever wonder how much electricity your kiln uses? The digital controller can figure this for you with the press of a button. Find out how little a kiln actually costs to fire.
The GL-18ADTSD has a durable high temperature, water-base finish. We use water-base paint because of the low emissions during spraying. This creates a safer working environment for our employees and cuts down on pollution.
Customer Service
At Paragon, phone calls that we receive during business hours are answered by a live person at the factory. We are here to help you long after the sale should you ever need it.
Optional Ceramic Fiber Top
The standard GL-series kiln comes with an insulating firebrick top, grooved for heating elements. The upgrade option is a ceramic fiber top with element grooves. The fiber top helps keep the glass clean during firing.
Optional Kiln Stand
The heavy-duty GL-series stand raises your GL-18, GL-22 or GL-24 kiln to a convenient working height. Begin operating your new kiln without having to find a table strong enough to support over 300 pounds. The table is 147 pounds of rock solid construction.
Specifications
Max. Temperature
|
1700F 926C
|
Amps
|
20
|
Phase
|
1
|
Watts
|
4800
|
Nema
|
6-20R
|
Breaker Size
|
20
|
Circuit Copper Wire Size
|
12 gauge
|
TUV tested to CSA and UL Standard 499
|
Y
|
CE
|
N
|
IMPORTANT: Some areas such as Canada and Europe require a lid or door safety switch on kilns.
|
Control Type
|
Sentry Digital 12-key Non-Ceramic
|
Voltage
|
240
|
Hertz
|
60
|
Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations.
The pricing and electrical specifications for the above products reflect their design for use in the United States. The International versions of most models will have variations in electrical specifications and price due to consumer safety requirements or electrical regulations.
|
|
Kiln Type
|
Front Loading Square
|
Sides
|
4
|
Understanding Chamber Measurements
|
|
Chamber Volume
|
2.40 CU.FT. 67.96 litres
|
Chamber Width
|
18.00 IN 457 mm
|
Chamber Depth
|
18.00 IN 457 mm
|
Chamber Height
|
13.00 IN 330 mm
|
The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom
|
Outer Size
|
34.50W x 28.00D x 25.50H Inches 876W x 711D x 648H mm
|
Ship Size
|
36.00W x 40.00D x 38.00H Inches 914W x 1016D x 965H mm
|
Ship Weight
|
270.00 Lbs. 122.47 Kg.
|
Ship Method & Notations
|
This Kiln Ships Via Truck
|
|
|
|
|
Part Number
|
GL18ADTSD * Base Model
|
|