Paragon CALDERA XL Kiln
Note: All Paragon Kilns with 3 key Controller now Include Free Upgrade to the Bartlett Genesis Mini Touch Screen Controller!
Genesis Mini have a modern and intuitive user platform with touch-screen technology for an effortless user interface. It can store up to 12 custom user programs with up to 32 segments per program and has the ability to make adjustments during a firing such as add segments, add temperature, and skip segments. Additionally, the easy-to-follow screen descriptions and graphical display of the firing process, allow the Genesis kiln controller to make firing kilns extremely straightforward.
This controller will make firing kilns just a little bit easier in these ways:
*touch-screen technology for the user interface
*easy-to-follow screen descriptions
*different user-interface levels, which can be set to match the user’s firing knowledge
*graphical display of the firing process right at the controller
*Store up to 30 custom user programs
*Up to 32 segments per program
*Ability to make adjustment during a firing such as add segments, add temperature, and skip segments
*Built in diagnostics testing for use with a current sensor
*Alarm
*Error Codes
*WiFi enabled for easy software updating
*Register your Genesis on our web site or mobile app for remote monitoring of your kiln
Paragon Caldera XL Kiln
Fire porcelain, stoneware, china, ceramics, and decals in the Paragon Caldera XL kiln. Test glazes and glaze
application ideas before running production quantities in a large studio
kiln.
You will not outgrow this small digital test kiln even if you acquire a larger kiln later. Continue to use the Caldera XL for
testing or for small projects. Carry it with you to seminars or on
vacation; convenient hand lifts on the sides aid in moving the kiln.
The Caldera XL in the Classroom
A Caldera XL is a nice addition to school
programs. This digital test kiln is relatively inexpensive. With the Caldera XL,
students can make gifts in time for a birthday or holiday instead of
waiting until the school’s large kiln is fired. A test kiln creates
enthusiasm for a clay program. Students can test glazes while they feel
the momentum instead of waiting to fire them in the large kiln.
New teachers inherit bags of unlabeled clay
in their classrooms. Many loads of clay have been ruined because they
were fired to the wrong temperature. With a Caldera XL kiln, you can
easily test unlabeled clay.
Built to Last
The firebrick corners are fitted together
with L-shaped notches for extra strength. This type of joint lasts
longer than the butted joint and the "picture frame" mitered joint found
on competitive brands.
The Type-K thermocouple, which reads the
firing chamber temperature, is protected in a high-nickel stainless
steel sheath for long life. A steel base supports the brick bottom. The Paragon Caldera XL kiln comes with a built-in steel stand; no extra stand is needed.
Use the switch on the front panel to turn off power to the controller when the digital test kiln is idle.
Both sides of the lid and top rim of
sidewall firebricks are hardened and sealed with a refractory coating to
protect the ware from dust. The firing chamber, including the lid and
bottom, is made of 3” thick firebricks, 20% thicker than standard 2 1/2”
bricks.
The Paragon Caldera XL kiln has dual mechanical relays for extra reliability. They turn on power to the elements after
receiving a signal from the digital controller. Two relays last longer
than the single relay of competitive kilns because of the reduced
amperage going through each relay.
Heating elements are made from the finest
high-temperature wire available. Paragon uses heat-dissipating element
connectors refined and proven over many years in our kilns. The stainless steel case and lid band include case tighteners for easy maintenance of the digital test kiln.
Water-Base Paint
The Paragon Caldera XL kiln control box is painted with a durable high temperature, water-base finish. We use water-base paint
because of the low emissions during spraying. This creates a safer
working environment for our employees and cuts down on pollution.
UPS Shipping
The Paragon Caldera XL kiln can ship by UPS. Enjoy a lower
shipping cost and faster service. Specially designed cartons and foam padding assure that the digital test kiln will arrive safely.
The Convenience of Digital Firing
The reliable solid-state Sentry Xpress controller
continually monitors the firing so you do not need to watch it closely.
(Please remember, however, to check the kiln occasionally during firing
and to monitor it near the expected shutoff time.)
Paragon’s innovative controller will help
you achieve consistent firing results. The user-friendly controller has
powerful features that you will enjoy.
The Sentry Xpress controller fires in either
Ramp-Hold or Cone-Fire mode. Control both heating and cooling with
simple 3-key operation.
Features of the Sentry Xpress 3-key Controller for Ceramic Kilns
Fire to a pyrometric cone by merely entering cone number and slow, medium, or fast speed.
Use Program Review to check the accuracy of the program you are about to fire.
Set a temperature alarm to remind yourself to close a vented lid or check the kiln at a certain temperature.
Design Ramp-Hold programs with up to 8 segments (steps).
Skip a segment in Ramp-Hold during firing.
Hold (soak) the temperature in both Cone-Fire and Ramp-Hold.
Control both heating and cooling in Ramp-Hold.
Add hold time in Ramp-Hold during firing.
Change the target temperature in Ramp-Hold during firing.
Temperature Display throughout firing and cooling in your choice of °F or °C
Thermocouple Offset adjusts the thermocouple readout.
Set the Delay to turn on the kiln later to suit your busy schedule.
Error Messages report mechanical problems such as a disconnected thermocouple, stuck relay or broken element.
LED Lights show whether you are in program, review, or firing mode.
Colorful, illustrated
instruction manual. Download it from the “Additional Information”
section below to review these features in more detail.
Creative Satisfaction
The heat of the kiln offers wonderful
surprises. Glazes undergo a complete transformation in the kiln. Opening
a kiln to view your masterpieces is a joy you will never outgrow. Get
your family involved and create priceless memories using your kiln.
The OPTIONAL Furniture Kit
The furniture kit consists of carefully
selected fireclay shelves and posts for the Caldera XL or Caldera XL-KS.
When estimating the price of the kiln, include the cost of furniture.
The furniture allows you to stack multiple layers of ware. Without it,
you could fire only the ware that would fit on the kiln bottom.
Made in the USA
The Caldera XL is proudly made in Mesquite,
Texas by master craftspeople. Half of our factory employees have been at
Paragon for at least 10 years. Phone calls during business hours are
answered by a live person at the Mesquite factory. We are open from 7
a.m. to 5:30 p.m. Central Standard Time Monday through Thursday. These
expanded hours allow us to serve customers in differing time zones. Call
us—we would enjoy hearing from you. Our customer service
representatives will be glad to help you after the sale, even long after
the kiln is out of warranty, and at no charge.
Specifications
|
Max. Temperature
|
2350F
1287C
|
|
Amps
|
15
|
|
Phase
|
1
|
|
Watts
|
1800
|
|
Nema
|
5-15R
|
|
Breaker Size
|
20
|
|
Circuit Copper Wire Size
|
12 gauge
|
|
TUV tested to CSA and UL Standard 499
|
Y
|
|
CE
|
N
|
|
IMPORTANT: Some areas such as Canada and Europe require a lid or door safety switch on kilns.
|
|
Control Type
|
|
|
Voltage
|
120
|
|
Hertz
|
60
|
|
Nema Details
|
|
|
|
Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations.
The pricing and electrical specifications for the above products reflect their design for use in the United States. The International versions of most models will have variations in electrical specifications and price due to consumer safety requirements or electrical regulations.
|
|
|
Kiln Type
|
Top Loading Square
|
|
Sides
|
4
|
|
Understanding Chamber Measurements
|
|
|
Chamber Volume
|
0.29 CU.FT.
8.21 litres
|
|
Chamber Length
|
7.50 IN
191 mm
|
|
Chamber Width
|
7.50 IN
191 mm
|
|
Chamber Depth
|
9.00 IN
229 mm
|
|
The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom
|
|
Outer Size
|
17.00W x 20.00D x 17.50H Inches
432W x 508D x 445H mm
|
|
Ship Size
|
27.50W x 20.50D x 24.00H Inches
699W x 521D x 610H mm
|
|
Ship Weight
|
75.00 Lbs.
34.02 Kg.
|
|
Doorway Clearance Needed
|
17.00 Inches
431.80 mm
|
|
Ship Method & Notations
|
This Kiln Ships Via UPS
|
|
|
|
|
|
|
|
Part Number
|
S1223 * Base Model
|
|
