Mayco Designer Liner 401 BLACK

Designer Liner is a concentrated, clay-based pigment, packaged in a 1.25 oz. squeeze bottle featuring a metal writer tip. The metal tip allows for precise application - almost as accurate and precise as a ball point pen. You can create designs, outline shapes or patterns in your design, create stripes, dots, squiggles & lines, or write words.

It can be applied directly on clay, bisque, or over other glazes. Designer Liner will fire to a matte finish - a clear or transparent glaze (Foundations Sheers, for example) will give it a gloss finish.

Designer Liner can also be applied using a liner brush, such as CB-110 #10/0 liner. Will fire from cone 05/06 up to cone 6.

Product Features & Attributes

• Quick Drying - design integrity is maximized, but clogging the narrow passages of the metal and/or plastic tips may occur. The small straight pin is provided to ream either orifice should it become clogged.
• Matte Finish - may require a clear or transparent glaze if a gloss finish is desired.
• Non Toxic, Food Safe. May not be suitable for dinnerware due to surface characteristics.
• 1.25 oz squeeze bottle (includes metal writing tip)

Helpful Hints

• Remove the white cap then gently puncture plastic tip with the metal writer tip.
• After placing the metal tip onto the bottle cap, push the included pin through the small ziptop bag and seal (this makes it easier to keep track of the pin).
• Keep the pin in the metal writer tip when not in use.
• Designer Liner is clay based. As such, it is the nature to dry quickly which can promote clogging in the narrow passages of the metal and or plastic tips.
• Clear or transparent glazing is necessary for gloss finish. Designer Liner will fire matte when no glaze is applied over top.
• Design work could be distorted when applied on top of glazes that have a tendency to move.
• Wipe tip periodically on a damp sponge to keep clean.
• Keep the metal pin to unclog the tip and keep the metal writer tip free from debris.
• If Designer Liner begins to dry in the bottle you can add a few drops of water to reconstitute Designer Liner. Stir and test for proper viscosity. Add water in small amounts to avoid over-thinning the Designer Liner.
• Place some Designer Liner on a tile and use a CB-110 #10/0 Liner Brush for extra fine outlining or detailing.
• Designer Liner is not a dimensional product. If applied too thick or heavy, Designer Liner will crack and possibly pop off.