L&L JD2936-3 - Jupiter Kiln 3" Brick : 28 x 36"

L&L JD2936-3 - Jupiter Kiln 3" Brick : 28 x 36"

L&L Kilns JD2936-3 Jupiter Kiln is a customizable pottery and ceramics kiln. Jupiter kilns are professional grade and are free shipping from Sheffield Pottery.

This is a large 3 section model
It is 28" across and 36" deep for 13.6 cubic feet!
Electrical:
At 240 or 208 / Single Phase : requires 100 amp Breaker
At 240 or 208 / 3 Phase requires 70 amp breaker.
Direct Wire : Does not include power cord.
Ship Weight: 585 lbs Kiln alone / 750 lbs with Furniture Kit

Features of L&L Jupiter JD Series Kilns

Reversible Bottom
Dynamic zone control
Most models and voltages Cone 10
Add and remove sections
Hard Ceramic Element Holders

Options

FURNITURE KIT Includes Cone 11 full shelves and half shelves as listed below plus a post kit which includes six each 1/2”, 1”, 2”, 4”, 6” and 8” high 1-1/2” square cordierite posts plus heat-resistant gloves
VentSure: Down-draft kiln vent: 130 CFM downdraft vent pulls air down to bottom of kiln to improve temperature uniformity and vent corrosive fumes. Bypass collection box mounted on kiln allows adjustment of venting. Fan motor, mounted away from the kilns, stays cool and no vibration is transmitted to the kiln. Now includes multi-mounting bracket
Quad Element Option: Four rows of elements for each 9” kiln section. Maximum element life for constant high-firing.
Solid State Relays : Super long lasting : may never need replacing
Type S Thermocouples : For firing to precise set points
PULL-APART OPTION FOR SCULPTURE Any Jupiter or DaVinci kiln can be made with the Pull-Apart Option. Includes floor mount stand for control panel, lift off lid with extra handles but no hinge.
This option allows the entire kiln to be dismantled to make it easy to load large sculptural pieces. The kiln sections are unplugged and then taken off one at a time.