Home > Kilns > L&L Kilns > L & L Kilns Easy Load Front Loading Kilns >

L&L Kilns: EL3048 Easy Load Commercial Grade Kiln


L&L Kilns:  EL3048 Easy Load Commercial Grade Kiln
L&L Kilns: EL3048 Easy Load Commercial Grade Kiln


 
L&L Kilns:  EL3048 Easy Load Commercial Grade Kiln
Our Price: $21,999.00



Availability:: Usually Ships in 4 to 6 Weeks
Product Code: LKEL3048

L&L Genesis Touch Screen

L&L Genesis Touch Screen Controller Upgrade [Add $130.00]
L&L Vent Sure

L&L Vent-Sure Kiln Vent System [Add $399.00]
L&L Vent Control

Add Intergrated Vent Control : (12 key Dynatrol only: Not compatible with Genesis Touch Screen) [Add $155.00]
Electrical Service

240Volt/Single Phase
208Volt/Single Phase
240Volt/Three Phase
208Volt/Three Phase
Lift Gate Delivery

Lift Gate Delivery : Truck will get equipment to the ground [Add $35.00]
Lift Gate Delivery Not Needed: I Have Loading Dock or Forklift

Qty:  
Description PRODUCT VIDEOS
 
Expert Kiln Support

L&L Kilns Easy-Load Front-Loading Kilns

Large Commercial Grade Professional Kilns • Cone 10

Model EL3048 Easy-Load Front-Loading Kiln

Model EL3048 Easy-Load Front-Loading kiln with Multi-Program Three-Zoned DynaTrol, hard ceramic element holders, separate attached stand, cool-firing separate side-mounted panel, multi-layered insulation (3" K23 firebrick with 2" back up mineral wool), full arch 4-1/2" thick firebrick roof made of harder K25 firebrick, side, back and door elements, door gasket, heavy gauge welded case that is powder-coated hammertone blue for corrosion resistance, manual vent system with roof plug and bottom inlet holes with sliding damper. 31" Wide x 32-1/2" Deep x 49" High (25 cubic feet). MET-us listed in the USA. Direct power connection. Cone 10 for all voltages. See this page for Front-Load

Easy-Load Front-Loading kiln with Multi-Program Three-Zoned DynaTrol, hard ceramic element holders, separate attached stand, cool-firing separate side-mounted panel, multi-layered insulation (3" K23 firebrick with 2" back up mineral wool), full arch 4-1/2" thick firebrick roof made of harder K25 firebrick, side, back and door elements, door gasket, heavy gauge welded case that is powder-coated hammertone blue for corrosion resistance, manual vent system with roof plug and bottom inlet holes with sliding damper.
MET-us listed in the USA. Cone 10 for all voltages. All the kilns except the EL3048 will go through a 34-1/2” wide by 75” high door. The EL3048 needs a minimum door size of 40-1/2” wide by 76” high. All Easy-Load and Hercules kilns can be moved with a pallet-jack from any side. Crated with interior support and air-cushion skids. Shipping by air-ride truck.

Hearth Height: Approximately 30” for EL2436 and 18” for all other models
Moving and installation: The EL2436 will go through a standard 34-1/2” door that is at least 76” high.
The EL2448 and EL2848 will go through a door that is 34-1/2” wide by 86” high. The EL3048 will go through a door that is 40-1/2” wide by 86” high.
The kiln must be moved on a flat surface.
The case is designed to be picked up by a forklift or pallet jack from the front, back or sides.
LL Kilns Easy Load front loading kilns specs LL kilns easy load front loading kilns electrical specs

Accessories for this product...
L&L Vent-Sure Kiln Vent System
Our Price: $425.00

Add
VENT-SURE KILN VENTING SYSTEM

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Kilns > L&L Kilns > L & L Kilns Easy Load Front Loading Kilns