Home > Kilns > L&L Kilns >

L&L Kilns Davinci XB2318-D

L&L Kilns Davinci XB2318-D
L&L Kilns Davinci XB2318-D

L&L Kilns Davinci XB2318-D
Our Price: $6,650.00

Price with Selected Options: $6,650.00
Crating Fee $600.00
Item Class Pottery Kilns

Product Code:

L & L Kilns Voltage

L&L 208 / 3 Phase
L&L 208 /Single Phase
L&L 240 / 3 Phase
L&L 240 / Single Phase
L&L 480 Volt : Not UL Listed [Add $895.00]
L&L 480 Volt : UL Listed [Add $895.00]
L&L Furniture Kit

L&L Add Furniture Kit to XB2318D [Add $449.00]
L&L Genesis Touch Screen

L&L Genesis Touch Screen Controller Upgrade [Add $200.00]
L&L Vent Sure

L&L Vent-Sure Kiln Vent System [Add $549.00]
L&L Vent Control

Add Integrated Vent Control : (for Genesis or Dynatrol only) [Add $215.00]

L&L 120 VOLT: e- Noise Control:
NY City, Long Island, FL, Texas Freight

NY City, Long Island, Texas Freight*:
I am not in any of these these states
NYC, LI, FL, Texas Freight Charge L2 [Add $174.99]
North West Freight

WA and OR Freight*:
Washington State + Oregon Freight Surcharge L2 [Add $500.00]
I am not in either of these states
Western States Freight

CA, NV, AZ, ID, MT, WY, UT, CO, NM Freight Charge L3 [Add $249.00]
I am not in any of these states
Lift Gate Delivery

Lift Gate Delivery : Truck will get equipment to the ground [Add $35.00]
Lift Gate Delivery Not Needed: I Have Loading Dock or Forklift


L&L Kilns Davinci XB2318-D

Model XB2318-D Square Automatic DaVinci Kiln with a Multi-Program Two-Zoned DynaTrol control. The control panel is a Jupiter panel that mounts the the kiln on stand-offs and plugs into the various kiln sections. Sectional and modular construction allows future expansion aided by the unique adjustable spring-loaded counterbalanced welded and powder-coated hinge system.

Sides are made of specially machined arched bricks for strength. Stand is a welded steel frame with a sheet of aluminized steel between the bottom brick and the stand. Kiln comes with hard ceramic element holders, thermocouple protection tubes, and solid peephole plugs.
22" Wide x 22" Deep x 18" High (5 cubic feet).
High Power Elements to compensate for just having two sections. 3" K23 brick.
Direct power connection. C-MET-us listed in the USA & Canada.
Cone 10 all voltages.

Assembly: Two 9” high sections stack on top of each other. The stand is separate. The counterbalanced hinge gets attached to the kiln and floor for stability. The kiln is very easy to assemble and disassemble. The kiln sections plug into the separate control panel.

Construction: Stainless steel wrapped around shaped firebrick. There are three adjustable clamps welded to each casing. All assembly is with stainless steel screws. Unique shallow side arches create super-strong sides and allow for plenty of space for air circulation around kiln shelves.

Hinge: Welded angle iron counterbalance system with springs. Safety latch included. Welded angle iron with leveling bolts. Stand: The welded angle-iron stand is separate but attached to the case. It includes leveling bolts and holes for anchoring the kiln to the floor. The angle-iron frame is covered with a layer of aluminized steel which the bottom of the kiln sits on.

Brick Coating: A proprietary brick coating is applied to all interior surfaces of the kiln. This is put on before the element holders are inserted. This coating penetrates the firebrick and fuses the surface on a microscopic level which helps prevent dusting and crumbling of the fragile firebrick.
Peephole Plugs: Solid ceramic peephole plugs with full 1” diameter. Two total: one per section.
Warranty: Limited Three Year Warranty

Browse for more products in the same category as this item:

Kilns > L&L Kilns
Kilns > L&L Kilns > DaVinci Series Kilns