Home > Kilns > L&L Kilns >

L&L Kilns : Davinci X2327-D

L&L Kilns :  Davinci X2327-D
L&L Kilns : Davinci X2327-D

L&L Kilns :  Davinci X2327-D
Our Price: $7,375.00

Price with Selected Options: $7,375.00
Crating Fee $500.00
Item Class Pottery Kilns

Product Code:

L & L Kilns Voltage

L&L 208 / 3 Phase
L&L 208 /Single Phase
L&L 240 / 3 Phase
L&L 240 / Single Phase
L&L 480 Volt : Not UL Listed [Add $895.00]
L&L 480 Volt : UL Listed [Add $895.00]
Options: Use Check Boxes and Hit Update Price

L&L Furniture Kit:
L&L Add a Furniture Kit To DaVinci T2327 [Add $809.00](nine 22" x 11" shelves and one large square post kit with with with six each 1/2", 1", 2", 3", 4", 5", 6", 8" high posts)
L&L Genesis Touch Screen

L&L Genesis Touch Screen Controller Upgrade [Add $200.00]
L&L Jupiter/DaVinci Powered Bottom

L&L Jupiter/DaVinci Powered Bottom:
L&L Add a Powered Bottom To T2300 Series : Save 15% [Add $1,041.00]
L&L Vent Sure

L&L Vent-Sure Kiln Vent System [Add $549.00]
L&L Vent Control

Add Integrated Vent Control : (for Genesis or Dynatrol only) [Add $215.00]

L&L 120 VOLT: e- Noise Control:
NY City, Long Island, FL, Texas Freight

NY City, Long Island, Texas Freight*:
I am not in any of these these states
NYC, LI, FL, Texas Freight Charge L2 [Add $174.99]
North West Freight

WA and OR Freight*:
Washington State + Oregon Freight Surcharge L2 [Add $500.00]
I am not in either of these states
Western States Freight

CA, NV, AZ, ID, MT, WY, UT, CO, NM Freight Charge L3 [Add $249.00]
I am not in any of these states
Lift Gate Delivery

Lift Gate Delivery : Truck will get equipment to the ground [Add $35.00]
Lift Gate Delivery Not Needed: I Have Loading Dock or Forklift


L&L Kilns : DAVINCI X2327D

Order your DaVinci square and rectangular sectional kiln from Sheffield Pottery. Ask about our professional delivery and inside set up.

X2327-D Electric Kiln

Model X2327-D Square Automatic DaVinci Kiln with a Multi-Program Three-Zoned DynaTrol control. Models below 60 amps use a side mounted Jupiter panel. Larger amperage models use a floor-standing control panel. Sectional and modular construction allows future expansion aided by the unique adjustable spring-loaded counterbalanced welded and powder-coated hinge system. Sides are made of specially machined arched bricks for strength. Stand is a welded steel frame with a sheet of aluminized steel between the bottom brick and the stand. Kiln comes with hard ceramic element holders, thermocouple protection tubes, and solid peephole plugs. 22" Wide x 22" Deep x 27" High, (8.1 cubic feet). 3" K23 brick. Direct power connection. C-MET-us listed in the USA & Canada. Cone 10 all voltages.

DaVinci Kilns Features
Square and rectangular DaVinci kilns use shallow arches for their sides. This is very stable and much stronger than oval kiln designs where the weak front can cave in under pressure (from loading or moving). Loading of many types of ware (for instance plates and tiles) is far more efficient in a square or rectangular kiln than in a polygonal or oval kiln. The extra “plus” space created by the arch in the sides helps natural convection inside the kiln without taking up valuable loading space. This natural convection promotes even firing.
Spring-counterbalanced brick lid
The lid can be opened with one hand. Because the lid closes gently there is less wear and tear on the lid and rim. In addition, the lid is fully supported around the perimeter with structural steel members. This takes stress off of the fragile firebrick. The hinge post is adjustable up and down. This allows the hinge
system to be adapted to your kiln if you add or remove a section. The heavy-duty hinge system is made of welded structural steel. The lid is worry-free firebrick. A rigid steel channel frame surrounds the lid. Stainless steel channels hold the lid to this frame. Even if the door cracks it will maintain its integrity and stay in place. Adjust size by adding sections All DaVinci production kilns are made in 9” high sections that come apart. You can increase or decrease the size by adding or removing a section (without removing the lid!)
Heavy-duty welded frame bottom
The welded stand will solidly support the weight of the kiln and the heaviest load in your kiln.
Easy to move and set up Because the DaVinci kilns come in 9” high sections, they can be easily moved and set up. Move them through any standard 32” wide doorway.
Elements last up to four times longer
Heavy gauge premium elements with a very low watt density last 3 to 4 times longer than most typical kiln elements, proven in over 20 years of firing. There are three elements per 9” high section. Branch fusing Each element circuit or zone is separately fused in a branch circuit.
Handheld DynaTrol zone control with “Dynamic Zone Control”. (See page 10). An On/Off switch turns power off to the kiln when not using it. A control fuse protects the control circuit.
Floor standing detached control panel
The control panel mounts on the floor - away from kiln heat. Switches and sensitive components last longer. Kiln sections plug into the panel with flexible cords. The panel door is hinged and all wiring is neatly laid out for easy maintenance.

Browse for more products in the same category as this item:

Kilns > L&L Kilns
Kilns > L&L Kilns > DaVinci Series Kilns