L&L Kilns, E23S 2.5" EASY FIRE KILN

Browse Categories Below

Description

PRODUCT VIDEOS

L&L Easy-Fire Kilns

L&L E23S: 2.5" EASY FIRE KILN

23" Diameter
18" High
4.7 Cubic Feet

The easy-fire kiln meets the needs of teachers, institutions, camps, hobbyists, potters and others who need an easy to operate, easy to set up, easy to maintain, easy to understand, and easy to buy kiln. It has L&L’s robust and time-proven technology like ceramic element holders, industrial-grade element terminals, ceramic thermocouple protection tubes, heavy-duty elements, corrosion resistant materials, “Easy-Open, Easy-Load” spring hinge, removable control panel and zone control with four “Easy-Fire” programs. Get everything you need for one easy price.

Note: The prices shown above in "Choose your options" for Furniture kit and Vent are also discounted ! Use the check boxes and the update price button above to tune your package to fit your budget.

Features

Internal Size: 23-3/8" diam x 18" high
Cubic Feet: 4.7
Number of Sections: Two
Brick: 2-1/2" of premium select K23
Exterior Size: 32'' wide by 31'' high by 45'' deep
Recommended Floor Space: 54'' wide by 54'' deep
Max Temp: 2350F, 1287C, Cone 10
Control Panel Mount: Piggybacked on insulated terminal box
Control: DynaTrol with Dynamic Zone Control, 4 preset programs, 6 user defined programs
Thermocouples: Two Heavy-duty 8 gauge with industrial ceramic protection tubes
Hinge: Easy-Lift, Easy-Load Spring Hinge
Stand: Full Support Aluminized stand
Power Hook Up: Single phase only. Gets a 50 amp 6-50P cord

Specifications and Features

TEMPERATURE RATING: Cone 10
INSIDE DIMENSIONS: 23-3/8'' diameter by 18'' high with 2-1/2'' brick, 4.7 cubic feet
OUTSIDE DIMENSIONS: 32'' wide by 31'' high by 45'' deep
RECOMMENDED FLOOR SPACE: 54'' wide by 54'' deep

ENERGY, TIME AND FIRING COSTS: Typical heat up to cone 6 with a 55 pound load and with Vent-Sure on at 240 Volt/single phase is 5-1/2 hours, 38 kW hours, $3.80 @ 10 cents per kW hour.

SHIPPING WEIGHT: 285 pounds for kiln. 310 pounds for
kiln with vent. 370 pounds for kiln with furniture kit. 390
pounds for kiln with vent and kit. Shipping class 85.

SHIPPING DIMENSIONS: 44'' by 44'' by 47'' high (with Furniture Kit)

Element Support Hard Ceramic Element Holders
Element Terminations Stainless Bolts on Ceramic Blocks, no special tools needed
Zone Control Included at no extra cost (three zones)
Thermocouples Heavy-duty 8 gauge with Ceramic Protection Tubes (3)
Hinge Spring-Assist reduces weight of lid
Hinge Support Bars No - nothing to get in way of loading
Door Angle When Open To the back (doesn’t hang over opening)
Hinge Safety Latch Yes. Locking plunger pin, very positive & secure
Stand Full support, 14 ga aluminized steel with rigid bends
Elements Heavy-Duty
Brick Coating Reflective coating on entire interior, hardens brick
Easy Delay Start, Preheat, Hold Yes
Number of Easy Ceramic Programs Four
Number of User-Defined Programs Six
Instructions Complete easy-to-read visual manual, Video included
On/Off Switch Yes - you can turn kiln off
Control Fuse Yes
Control Panel Removable, separate piggybacked panel for control
Power Cord 6-50P for 1 phase, 15-50P for 3 phase
Sectional Construction Yes, easy to move and set up
Reversible Bottom Yes
Cone Limitation Cone 10
Brick Thickness 3''
Case Construction Stainless Steel, 3 clamps each
Assembly Screws Stainless Steel
Safety Agency Listing c-UL-us listed, Vent-Sure vent is also c-UL-us listed
Vent Downdraft, fumes under vacuum, motor on wall
Warranty Three Year Limited Warranty for both kiln & vent

Optional Vent Sure System

By mounting the fan assembly away from the kiln L&L ensures the safety of the vent, keeps the vibration of the motor away from the kiln and ceramic ware, and keeps the heat of the kiln away from the fan motor for long trouble-free life. The fumes can’t get pushed out into your room through a leak in the duct. The patented downdraft technology from Orton improves kiln uniformity and improves glaze color. easyfire kilns and the Vent-Sure vent system are c-UL-us listed.

L&L Easy_fire Kiln Specs

Features

Internal Size: 23-3/8" diam x 18" high
Cubic Feet: 4.7
Number of Sections: Two
Brick: 2-1/2" of premium select K23
Exterior Size: 32'' wide by 31'' high by 45'' deep
Recommended Floor Space: 54'' wide by 54'' deep
Max Temp: 2350F, 1287C, Cone 10
Control Panel Mount: Piggybacked on insulated terminal box
Control: DynaTrol with Dynamic Zone Control, 4 preset programs, 6 user defined programs
Thermocouples: Two Heavy-duty 8 gauge with industrial ceramic protection tubes
Hinge: Easy-Lift, Easy-Load Spring Hinge
Stand: Full Support Aluminized stand
Power Hook Up: Single phase only. Gets a 50 amp 6-50P cord