Home > Kilns > L&L Kilns > Doll-Baby Series Test Kilns >

L&L DLH11-DXB Doll Baby Kiln Cone 10 with 3 Key One Touch Control

L&L DLH11-DB Doll Baby Kiln Cone 6  with 3 Key One Touch Control
L&L DLH11-DXB Doll Baby Kiln Cone 10 with 3 Key One Touch Control

List Price: $1,488.00
Our Price: $1,650.00

Price with Selected Options: $1,650.00
Item Class Pottery Kilns

Product Code: LKDDLH11DXB

L&L Furniture Kit

L&L Furniture Kit for Doll/Test Kiln [Add $140.00]
L&L Vent Sure

L&L Vent-Sure Kiln Vent System [Add $549.00]
Western States Freight

WA, OR, CA, NV, AZ, ID, MT, WY, UT, CO, NM Freight Charge L1 [Add $149.00]
Lift Gate Delivery

Lift Gate Delivery : Truck will get equipment to the ground [Add $35.00]
Lift Gate Delivery Not Needed: I Have Loading Dock or Forklift


L & L Kilns Doll-Baby Series : DLH-11 DXB : Cone 10

L and L Kiln Test doll Model DLH11-DXB Doll/Test Kiln with a One-Touch™ Control.
Kiln comes with hard ceramic element holders, protected thermocouple, strong solid-top stand, and solid peephole plug.

11" Diam x 9" High (0.5 cu ft). 2-1/2" K23 brick. High Volts - 208, 220 and 240 volt versions.
Cone 10 all voltages.
Includes NEMA 6-20 plug. C-MET-us listed in the USA & Canada.
2-1/2" (63 mm) K23 Premium Firebrick
One section
6 sides
0.5 cubic ft (14 Liters)
105 pounds (47 Kg)
11" Diam x 9" High
19" Wide x 25" Deep x 22" High
48.3 cm Wide x 63.5 cm Deep x 55.9 cm High

VOLTAGE 240 Single Phase 15 Amp Dedicated Breaker
  • Amps: 11.7
  • Wire Connection: 5-20P Plug
  • Wire Gauge for Connection: 14 Ga
  • Branch Fusing: Not Branch Fused
  • Element Wiring: Series
  • Max Temperature: Cone 10, 2350F, 1290C
One 9” high section sits on a bottom. The kiln is very easy to assemble and disassemble.
Stainless steel wrapped around shaped firebrick. There are three adjustable clamps welded to each casing. All assembly is with stainless steel screws. The kiln sections sit on a separate stand.
Simple strong hinge with chain for door support
Heavy-duty 14 gauge full solid stand with multiple bends for strength. Legs bolt on with heavy 1/4-20 stainless bolts. The metal is aluminized for good corrosion resistance.
A proprietary brick coating is applied to all interior surfaces of the kiln. This is put on before the element holders are inserted. This coating penetrates the firebrick and fuses the surface on a microscopic level which helps prevent dusting and crumbling of the fragile firebrick.
One solid ceramic peephole plug with full 1” diameter.

Accessories for this product...
L&L Vent-Sure Kiln Vent System
Our Price: $549.00


Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Kilns > L&L Kilns > Doll-Baby Series Test Kilns
Kilns > Small Test Kilns | PMC Kilns
Kilns > L&L Kilns