Paragon Xpress-E-14 Kiln with Digital Controller
13.0"W x 8.75"H x 13.5"D
2000°F Max Temp
240 Volts / 1 Phase / 60 Hz
13 Amps
3120 Watts
NEMA 6-20P Cordset
Note: All Paragon Kilns with 3 key Controller now Include Free Upgrade to the Bartlett Genesis Mini Touch Screen Controller!
Genesis Mini have a modern and intuitive user platform with touch-screen technology for an effortless user interface. It can store up to 12 custom user programs with up to 32 segments per program and has the ability to make adjustments during a firing such as add segments, add temperature, and skip segments. Additionally, the easy-to-follow screen descriptions and graphical display of the firing process, allow the Genesis kiln controller to make firing kilns extremely straightforward.
This controller will make firing kilns just a little bit easier in these ways:
*touch-screen technology for the user interface
*easy-to-follow screen descriptions
*different user-interface levels, which can be set to match the user’s firing knowledge
*graphical display of the firing process right at the controller
*Store up to 30 custom user programs
*Up to 32 segments per program
*Ability to make adjustment during a firing such as add segments, add temperature, and skip segments
*Built in diagnostics testing for use with a current sensor
*Alarm
*Error Codes
*WiFi enabled for easy software updating
*Register your Genesis on our web site or mobile app for remote monitoring of your kiln
The Xpress-E-14A enameling kiln fires to 2000°F- ideal for enameling, ceramics, china painting, glass art and jewelry. The 3-key
digital controller is in the base. The front control panel is tilted
for easy operation of the digital controller. Because the Paragon Sentry Xpress 4.0 kiln no longer has the side-mounted switch box, it saves tabletop space.
The Sentry Xpress 3-key controller is packed
with features. It includes two modes: Single Segment and 8-segment
Ramp-Hold.
Features of the Sentry Xpress 3-key
Controller on the Paragon Xpress-E-14
- Design programs with up to 8 segments (steps) in Ramp-Hold mode.
- Fire to a single temperature at a single speed in the simplified Single Segment mode.
- Ramp-Hold mode can store 4 programs.
- Skip Segment feature in Ramp-Hold mode
- Temperature hold
- The Sentry Xpress can control both heating and cooling.
- Program Review lets you check that the program you are about to
fire is correct.
- Temperature Display throughout firing and cooling in your choice of
°F or °C
- Error Messages report mechanical problems such as a disconnected thermocouple, stuck relay or broken element.
- 12 Month Warranty
- LED Lights show whether you are in program, review, or firing mode.
The heating
element, exposed in dropped, recessed insulating firebrick grooves, is
easy to replace. It needs no element pins. Unlatch and open the door of the enameling kiln with one hand. No extra stand is needed for the Paragon Sentry Xpress 4.0 kiln as the built-in base stays cool during operation.
Specifications
Max. Temperature |
2000F 1093C |
Amps |
13 |
Phase |
1 |
Watts |
3120 |
Nema |
6-20P |
Breaker Size |
20 |
Circuit Wire Size |
12 gauge |
UL |
Y |
CE |
N |
Control Type |
Sentry Digital 3-key Glass Control |
Voltage |
240 |
Hertz |
60 |
|
Sides |
4 |
Chamber Volume |
0.89 CU.FT.
25.20 litres |
Chamber Width |
13.00
331 mm |
Chamber Depth |
13.50
343 mm |
Chamber Height |
8.75
223 mm |
Outer Size |
21.50W x 23.00D x 18.50H Inches
547W x 585D x 470H mm
|
Ship Size |
32.00W x 24.00D x 26.50H Inches
813W x 610D x 674H mm
|
Ship Weight |
131.00 Lbs.
59.42 Kg. |
Ship Method |
This Kiln Ships Via Truck |
|
|
|
|
Part Number |
14611J1DTA * Base Model | |