Home > Kiln Room > Kiln Controllers and Pyrometers >

Paragon PCB-1 Controller for QuikFire 6 and Quikfire2 Kilns


Paragon PCB-1 Controller for QuikFire 6 and Quikfire2 Kilns
Paragon PCB-1 Controller for QuikFire 6 and Quikfire2 Kilns


 
Paragon PCB-1 Controller for QuikFire 6 and Quikfire2 Kilns
Our Price: $189.00
Item Class Kiln Accessories



Product Code:
PPCB1
Qty:

Description
 

Paragon PCB-1 Controller for QuikFire 6 and Quikfire2 Kilns



PCB-1 Power Control Box The PCB-1 is an infinite control switch used to slow the Paragon QuikFire 6 and earlier QuikFire 2 kilns.

Slower firing is necessary for large, thick pieces. The PCB-1 simplifies enameling and fusing decals to ceramics or glass. It may also be used for other kilns rated up to 120 volts, 15 amps. To operate, plug the PCB-1 into a 120 volt standard household outlet. Plug the QuikFire into the receptacle on the side of the PCB-1.
Regulate the firing speed by adjusting the infinite switch. The lower the switch setting, the slower the kiln fires. A pilot light glows during operation. The infinite switch regulates the firing speed by cycling the elements on and off. The lower the setting, the longer the elements stay turned off.

The switch makes a clicking sound as it cycles the elements on and off. This sound is normal. The PCB-1 comes with a one year warranty.

Designed for production Paragon’s warranty is not affected by frequency of use. Fire your new kiln every day if you want, even in commercial settings. That will have no effect on the warranty period.


Browse for more products in the same category as this item:

Kiln Room > Kiln Controllers and Pyrometers
Kiln Room