Paragon Janus-23 Dual Media Combination Glass / Pottery Kiln
INCLUDES DELUXE ROLLING KILN STAND!
22.5"Dia x 20.25"D
2350°F Max Temp
240 Volts / 1 Phase / 60 Hz
37 Amps
8918 Watts
Sentry 12-Key Controller
The new Paragon Janus-23 can fire both pottery and glass. Heating elements are mounted in the lid and sidewalls.
Select between glass and pottery with the
flip of a switch. With the switch in the glass position, heat comes
from the top elements and the middle sidewall element. With the switch
in the pottery position, heat comes from only the sidewall elements.
In the glass mode, fuse and sag large glass
projects placed on a single shelf. In the pottery mode, fire to cone
10. You can also fire several shelves of smaller glass pieces using the
pottery mode.
The elements in the lid are mounted in a
firebrick “ball” groove that eliminates element pins. The element coils
are wider than the groove opening, so the elements stay in place
without pins. The groove dissipates heat efficiently.
The lid on the Janus-23 is easy to lift with
the exclusive, patented Paragon spring counter-balance. For easier
maintenance, we use 2” high blank wall bricks in the top row. Since the
brick is without element grooves, it is less susceptible to damage
during loading.
The patented control box on the Janus-23
opens forward for easy maintenance. A folding support arm holds the box
in the open position.
The digital Sentry 2.0 includes two modes: Cone-Fire with programmed
slow cooling and 18-Segment Ramp-Hold. Manufactured by the Orton
Ceramic Foundation exclusively for Paragon.
- Glass/pottery selection switch
- 3” insulating refractory firebrick walls
- Sidewall elements in dropped, recessed brick grooves are easy to replace.
- Tapered peepholes for a wide view
- A steel floor pan supports the entire brick bottom of each kiln.
- One year limited warranty
- Available in 240, 200, 208, or 380 volt, 50 or 60 hertz, single or 3 phase.
- Easy-access control box with folding support arm.
- Since the Janus-23 is designed for porcelain, it also easily fires ceramics, china paint, decals, gold and, of course, glass.
Specifications
Max. Temperature |
2350F 1287C |
Amps |
37 |
Phase |
1 |
Watts |
8918 |
Nema |
6-50P |
Breaker Size |
50 |
Circuit Wire Size |
6 gauge |
UL |
N |
CE |
N |
Control Type |
Sentry Digital 12-key Ceramics |
Voltage |
240 |
Hertz |
60 |
|
Sides |
10 |
Chamber Volume |
5.10 CU.FT.
144.42 litres |
Chamber Diameter |
22.50
572 mm |
Chamber Depth |
20.25
515 mm |
Outer Size |
30.50W x 44.00D x 41.50H Inches
775W x 1118D x 1055H mm
|
Ship Size |
34.00W x 48.00D x 46.00H Inches
864W x 1220D x 1169H mm
|
Ship Weight |
295.00 Lbs.
133.81 Kg. |
Ship Method |
This Kiln Ships Via Truck |
|
|
|
|
Part Number |
21611N1G00 * Base Model | |