Home > Equipment > Clay Extruders > Bailey Pottery Wall Mount Clay Extruders >

Bailey 5" Stainless w/ System 3 Power Drive Frame Clay Extruder Package

Bailey Pottery 5" Stainless w/ System 3 Power Drive Frame Clay Extruder Package


 
List Price: $1,885.00
Our Price: $1,692.00
You save $193.00!
Item Class Clay Extruders



Product Code: BPM5006P
Qty:

Description
 

Bailey Pottery 4 Stainless Clay Extruder with System 3 Power Drive Frame

Bailey 9" Clay Extruder on sale at Sheffield Pottery PACKAGE INCLUDES:
Stainless Barrel
System 3 Power Drive frame
, (1) 1" Coil Die and (2) 5" x 6" Wood Blank Dies..


This is a stainless steel barrel designed to extrude medium size clay forms. Stainless Steel is recommended if you are extruding porcelain or are concerned about rust. The 5" Stainless Barrel comes with (1) 1" Coil Die and (2) 5" x 6" Wood Blank Dies.


Extrusion Range: Multiple solid clay coils single small solid clay coils will not extrude well from this barrel due to the amount of clay the barrel holds- the 4" Barrel is recommended for single solid clay coils , hollow clay tubes from 2" - 3" square or round.
Barrel Capacity: 17 lbs of clay
Bailey Optional Powered Extruder drive
System 3 Power Drive Frame is designed for use with any System Barrel. The System 3 is powered by an air compressor (not included) and provides a constant uninterrupted flow of clay for the entire plunge of the barrel. Operated by a foot pedal, both hands are always free to control the form. This allows the operator the greatest amount of control in forming a shape. The air cylinder pivots up for fast easy reloading. This unit comes complete with pressure regulator, moisture trap, pressure gauge, and foot pedal.
Most extruding will require a setting on the Power Drive Extruder regulator of about 90 to 100 lbs of pressure to extrude forms through the dies. This means the actual compressor should have an auto "on/off" setting on it's regulator (built into the compressor) that supplies about 85 psi (when it goes on) to 125 psi (when it goes off). You do not want a compressor that comes on lower than 80 lbs pressure. You can have a supply that goes up to 150 psi.


Browse for more products in the same category as this item:

Equipment > Clay Extruders > Bailey Pottery Wall Mount Clay Extruders
Equipment > Clay Extruders
Equipment