|
|
(Your shopping cart is empty)
|
|
 |
|
|
 |
Hand Painted Ceramic Pieces.
AMACOŽ Semi-Moist and Tube Underglaze Decorating Colors are suitable
for many types of ceramic painting. They are especially good for water
color effects and painting of fine detail.
Thirty-two Intense Colors. Decorating colors are concentrated,
intense and opaque. Additional shades and tints can be made by
intermixing. Colors may be brushed on either bisque or greenware.
A brush dipped in water lifts the color for decorating. Further
thinning of the water soluble colors prepares them for transparent
water color effects by brushing. Tube Underglaze Colors are the correct
consistency for silk screen printing.
Because the colors are approximately the same tone before and after
firing, the effectiveness of color combinations and blending can be
observed as painting progresses. Colors dry quickly and may be handled
without damage.
Clearness Essential for Covering Glazes. For clear, covering
glazes, AMACOŽ LG-9, LG-10, F-10, DC-10, and HF-9 are recommended. They
will not discolor the underglaze decoration or cause the colors to
bleed.
If the clear, transparent covering glaze is to be applied on the
decorated bisque by brushing, dab the first coat with a sponge or
brush. Let dry and then brush on the next two coats. When the
underglaze colors are applied on greenware, they are hardened on in the
bisque firing and the covering glaze applied either by brushing or
sponging.
Pieces are fired to the maturing temperature of the covering glaze.
Pink, maroon, peach, rose and yellow hold their color when fired to
temperatures up to Cone 6 (2269°F, 1243°C). All other colors may be
fired to an upper limit of Cone 10 (2381°F, 1305°C) with good retention.
All sets are supplied in hinged lid plastic boxes containing eight
assorted pans or 1/4 oz. tubes. Individual refill pans and tubes are
also available.
|
|
|
|
