• 12 Cubic feet
• 36" acrossX 26" front to back and 27"
deep.
• Double
wall construction
• Kanthal A-1 Elements
• 208 or 240 Volts
• 80 or 90Amp breaker required
• Sectional Design
• Counter weight lid lifter at NO EXTRA
CHARGE
• CSA approved
The Tucker’s Cone Art Kilns Model BX2336D is a
large 12 cubic foot oval kiln with a full 36" width. It has been
designed especially
for the busy production artist and sculptor studio that need the extra
width.
It is a DOUBLE INSULATED kiln with a wall profile
of 2 ˝" premium firebrick plus 1" of block insulation.The lid and floor
are 3" brick.
The extra insulation means a calculated 32% SAVINGS in electricity costs
over
a conventional 2.5" brick wall and 19.3% SAVINGS when compared to a 3"
brick wall profile. It also ensures a cooler, safer jacket and longer
element life.This is a big savings for you. Firing after firing!Year
after year! GOOD FOR YOU! GOOD FOR THE ENVIRONMENT!
The kiln is clad in a stainless steel jacket for
extra
protection and durability.
There are heavy-duty Kanthal A-1 elements in the
walls and floor. This makes firing to come 10 a breeze even with
high mass
loads.
The BX2336D is equipped with counter weight lid
lifter
and Bartlett electronic controller with 3 Zone Control.The
controller is
panel mounted on an angle for easy viewing. Both features come
standard at
NO EXTRA CHARGE.
MX Model: This kiln is equipped with counter
weight lid
lifter and a kiln sitter with timer.
There is no
other kiln that can match the Tucker’s Cone Art Kilns feature for
feature.
Optional Extra Furniture Kit
Six 21" dia. half shelves
Three 21" X 10.5" shelves
Nine each of 1 3/4"square X 1",2",4",6",8"
posts
2 kilograms kiln wash
All furniture is high alumina rated for cone
11.
