Temperature Rating:
Cone 12, 2400°F, 1315°C
Power Loading:
These kilns come with approximately 25% more power than a regular kiln
of similar size.
Loading: Lid position, when open,
rests at an angle away from the kiln. Hinge: The hinge of the JD18-JH is
not spring-loaded.
Stand: Heavy-duty
14 gauge full solid stand with multiple bends for strength. Bolt on
legs.
Assembly: Two or
three 9” high sections stack on top of each other. Easy to
assemble. Bottom is reversible.
Construction:
Stainless steel wrapped around brick with 3 clamps on each section. All
stainless screws.
Insulation:
2-1/2” K25 firebrick. on side and bottom, 3” K25 on top. K25 brick is
rated for 2500 Deg F, is deniser than K23 brick and is more durable.
Brick
Coating: Proprietary brick coating included.
Element Holders: Hard
ceramic element holders protect brick.
Quad Element Design:
Super Heavy-duty, thick elements with 4 wraps per 9” high section.
Element
Connections: Proprietary all-ceramic element connection
block makes changing elements easy.
Control Panel: All
controls and components are mounted in a separate control panel.
Mounting and type of panel vary with model number. The control panel and
element box are hinged for easy access and maintenance. Control box can
be easily removed for servicing. On/off switch and control fuse
are included.
Control: DynaTrol
with 4 Easy-Fire programs, 6 Vary-Fire programs, PreHeat, Delay,
Program & Segment Review, and Diagnostics. Two programs can be
combined for one 16 segment program.
Zone Control: Two
or three zone (one zone per kiln section) Each zone has a separate
thermocouple.
Peephole Plugs:
Solid ceramic plugs with full 1” diameter. One per section.
Thermocouples: Type
S with alumina protection tubes.
Power Cord/Plug: See
specifications.
Instructions:
Complete visual instructions with control reference, process
information, assembly, troubleshooting, and parts list. In addition videos on Youtube
shows how how to program.
Warranty:
Limited 3 year warranty.