SKUTT KILN KM1227-3 240V/1Ph
Finally,
an electric kiln line designed specifically for volume production and fast
turnaround of high mass loads. It has the power and industrial components
to go straight to temperature with a full load of tile or stoneware – no slow
struggling to reach the final temperature. The standard KilnMaster controller
gives you the options of Cone Firing, or selecting your own 8-segment Ramp/Hold
firing programs. The combination of direct wiring, heavy duty elements, connectors
and relays, plus traditional Skutt stainless steel and firebrick construction
results in a kiln that will last for years of constant use. Among the most
powerful on the market today, the line was designed at the request of Skutt
customers.
Skutt KM-1227-3 Single
Phase Electric Kiln
 Automatically
the top producer.
This is the perfect automatic electric kiln for high production, with nearly
10 cubic feet of loading capacity. For those who fire the same program for
many loads, you need simply to load and start one of your six stored programs,
and go back to work on your next batch. The KilnMaster will handle all the
firing details with truly superhuman precision, ensuring that you will get
superb consistency, load after load. If your 1227-3 is fitted with a Skutt
EnviroVent, you can plug all the peepholes, program a Delay to start your
firing at night, and be there for shut-off and unloading the next morning.
You get more sleep, and much more production. Available in three phase models.
Electrical Requirements
240 Volts 48 Amps 11520
Watts
208 Volts 48 Amps 9980 Watts
Copper Wire Size: 6
Breaker Size: 60
NEMA Receptacle Configuration: 6-50
Now all 10 and 12-sided KilnMaster Kilns come standard
with a Skutt Lid Lifter
Includes New Skutt Lid Lifter
The New Lid Lifter
makes our 10 and 12-sided
lids some of the lightest on the market. In fact you can now lift them with
just a finger. The lid brace has been redesigned for added strength and now
has 2 positions. The innovative Center Pivot Design distributes the force on
the lid across 2 points as opposed to only one.
It ships fully assembled
on the kiln. And unlike some other brands there is no awkward loading of
the springs required. The kiln remains completely sectional for moving and
repairs. The lid can be effortlessly and safely detensioned by simply raising
the lid and sliding out the tension rod. It really is that easy!
So Light You Can Lift It With A Finger
New Reinforced 2 position lid Brace
Innovative Center Pivot Design
Ships Fully Assembled
No Tension Loading Required
Does Not Affect Sectionality
Ceramic Handle Remains Cool
All Corrosion Resistant Parts
|
|
