Paragon Iguana Kiln | Potter's Kiln

PARAGON TALL IGUANA KILN with 22" Stand

Potter’s kiln available in 1 or 3 phase, 240 or 208 volts same price.
Add $225 for 480 volt

Sheffield Pottery's Own Paragon "Tall Iguana"

Our variation on the classic Iguana potter's kiln is 7 inches taller inside and powered with reliable extra heavy-duty Kanthal A-1 elements. This results in long element life, because the elements do not “struggle” to reach high temperatures. 10,500 watts heat the 18” wide, 18” deep, 27” high interior to a full cone 10.

208 volt, three phase, 29 amps per line, Direct wire.
Also available in 240 or 480 volts and single phase.
Mounted in 20" open metal framed stand.
3" Insulating firebrick plus 1" backup board.
4.5" Insulating firebrick floor.

Industrial-gauge Kanthal A1 elements are seated and protected in dropped, recessed firebrick grooves. The elements are easy to replace, because you can comfortably reach into the Paragon Iguana Kiln.

Potters and ceramists who struggle with top-loading potter’s kilns will enjoy the Paragon Iguana Kiln. The detachable door swings open wide on a heavy ½” steel rod with sealed bearings. A spring-loaded latch presses the door tightly closed. A recessed firebrick lip around the door seals in heat.

The Sentry digital controller is manufactured by Orton Ceramic Foundation. This potter’s kiln is unsurpassed in reliability for a controller in its price range. Orton cone tables preprogrammed. Storage for one 20-segment and three 10-segment programs. Programmable auxiliary output, single zone. The Paragon Iguana Kiln includes a programmed cool-down, Cone-Fire and Ramp-Hold modes, and is capable of accepting types K, R, or S thermocouples. A type-K thermocouple with an Inconel® sheath comes standard.

For your peace of mind, the Paragon Iguana Kiln includes a switch that shuts off power to the controller when not in use.

UL Listed

Options

Casters for stand
Stainless steel finish
Orton Kiln Master Vent, which mounts to the back of the kiln. Mounting holes are drilled in every Iguana for easy installation.
Potter’s Kiln Furniture Kit

Paragon Iguana Kiln Features

Saves electricity with 3” firebricks

Cone 10, 2350°F

Type-K thermocouple with ¼” sheath, or optional type-S

Sentry 2.0 controller with programmed cool-down

Two tapered peepholes in the side give a wide view of the interior with little heat loss.

Available in 208, 240, 480 volts, 1 & 3 phase

Proportional power elements for more even heating

Heavy-gauge steel completely covers the bottom under the firebricks for extra strength.

1 ½” air gap between the switch box and kiln; electrical components stay cool and last longer

Built-in fuse protects the controller

Four hand-lifts

The Optional Furniture Kit (not included)

The furniture kit consists of carefully selected fireclay shelves and posts for this particular model. When estimating the price of the kiln, include the cost of furniture. The furniture allows you to stack multiple layers of ware. Without it, you could fire only the ware that would fit on the kiln bottom.

Iguana Furniture Kit

3 C-17 full shelves (16” x 14” x 5/8”)

1 C-17H half shelf (8” x 14” x 5/8”)

1” wide square posts, 4 each in lengths of ½”, 1”, 2”, 3”, 4”, 5”, 6”

1 lb. bag kiln wash

Furniture Shipping Weight: 50 lb.

Specifications

Max. Temperature	2350F 1287C
Amps	45
Phase	1
Watts	10800
Nema	6-50P
Breaker Size	50
Circuit Wire Size	6 gauge
UL	N
CE	N
Control Type	Sentry Digital 12-key Ceramics
Voltage	240
Hertz	60

Sides	4
Chamber Volume	6.07 CU.FT.
Chamber Width	18.00 458 mm
Chamber Depth	18.00 458 mm
Chamber Height	27. in 572 mm
Outer Size	36.00W x 31.30D x 67.00H Inches
Ship Size	42.00W x 34.00D x75.00H Inches
Ship Weight	510.00 Lbs. .
Ship Method	This Kiln Ships Via Truck


Part Number	7261111G00 * Base Model

Paragon Kiln Tall Iguana Kiln with 22" Stand

PARAGON TALL IGUANA KILN with 22" Stand

Specifications