Home > Kilns > Olympic Kilns > Olympic Gas Raku and TorchBearer Kilns >

2831-Olympic Torch Bearer Kiln Natural Gas or Propane


2831-OLYMPIC TORCH BEARER KILN /NATURAL GAS or PROPANE With Burners and Ignition Ring
2831-OLYMPIC TORCH BEARER KILN /NATURAL GAS or PROPANE With Burners and Ignition Ring


 
Alternative Views:


2831-OLYMPIC TORCH BEARER KILN /NATURAL GAS or PROPANE With Burners and Ignition Ring
List Price: $2,940.00
Our Price: $2,349.00
You save $591.00!



Product Code: OL2831G

Olympic Gas Kilns Fuel Type

Propane (lp)
Natural Gas (lng)
Olympic Gas Raku/Torchbearer Controller

Olympic Gas Raku/Torchbearer Contro:
Olympic 120V High Limit Controller [Add $810.00]
Olympic Controller: None
Olympic Digital Pyrometer [Add $155.00]
Olympic Kilns Furniture Kit

2827 and 2831 Torchbearer Furniture Kit: Save 15% [Add $362.95]
Olympic Add Castors to Gas Kiln

Add castors [Add $175.00]
Olympic 18/23 Gas Vent Hood

Olympic 40"x40" Stainless Vent Hood for 28" Gas Kilns [Add $1,005.00]

Qty:  
Description
 

2831-OLYMPIC TORCH BEARER KILN /NATURAL GAS or PROPANE With Burners and Ignition Ring


2831G with Ignition System and Thermocouple Safety Shut-off.
Model - Olympic Torchbearer 2831G Gas Kiln with Ignition System and Thermocouple Safety Shut-off.
Inside dimensions: 28 ¼ " wide x 31 ½ " deep, fires to cone 10/2350°F
Model comes with burner system, four peephole plugs, brick for covering porthole on top during reduction, instruction manual, and warranty card. The ignition system with thermocouple safety shut-off is an option and the kiln may be purchased as a Base kiln. The optional gas kiln sitter system performs like it would on an electric kiln. A pyrometric cone is used and when the cone bends it will cause the kiln sitter to mechanically shut down the kiln. Propane kilns with kiln sitters need to be located near a 120-volt receptacle.
One-year warranty.

Note: The prices shown for the Torchbearer and Raku kilns here include the Ignition Ring with Thermocouple Safety Shut-off which adds a high degree of safety. We can supply these kilns without the Ignition ring but we feel that for safety's sake these should always be installed.

The ignition system is used to:
■ Light the multiple burner system from
one point
■ Maintain the flame on each burner
■ Re-ignite any burner that may
extinguish
The thermocouple safety shut-off will stop the gas flow if the flame is lost entirely.



Inside Dimension
Model
Inches
(Width)

Inches
(Depth)
Cubic Feet
Maximum
Temperature

BTU/
BUR
x1,000
Max BTU/ Input
Gas
Line
Inlet

Orifice
Size
Natural
Gas
Orifice Size Propane No. of Burners Shipping Lbs.
18 RAKU 17 - 1/2 " 22 - 1/2 " 3.29 2350°F/Cone 10 60 120,000 3/4 " 1/8 3/32 2 225
23 RAKU 23 - 3/8 " 27 " 7 2350°F/Cone 10 80 240,000 3/4 " 9/64 #40 3 315
28 RAKU 28 - 1/4 " 27 " 10 2350°F/Cone 10 70 280,000 3/4 " 9/64 #40 4 480
1827G 17 - 1/2 " 27 " 3.95 2350°F/Cone 10 60 120,000 3/4 " 1/8 3/32 2 205
18G BLANK RING 17 - 1/2 " 4 - 1/2 " 0.66
30
2327G 23 - 3/8 " 27 " 7 2350°F/Cone 10 80 240,000 3/4 " 9/64 #40 3 270
2331G 23 - 3/8 " 31 - 1/2 " 8.15 2350°F/Cone 10 80 240,000 3/4 " 9/64 #40 3 318
23G BLANK RING 23 - 3/8 " 4 - 1/2 " 1
40
2827G 28 - 1/4 " 27 " 10 2350°F/Cone 10 70 280,000 3/4 " Sep-64 #40 4 396
2831G 28 - 1/4 " 31 - 1/2 " 11.67 2350°F/Cone 10 70 280,000 3/4 " Sep-64 #40 4 420
28G BLANK RING 28 - 1/4 " 4 - 1/2 " 1.67
86


Accessories for this product...
Analog Pyrometer For Olympic Gas Kilns 120V/20A High Limit Electronic Wall Unit Including Valve For Olympic Gas Kilns
Our Price: $125.00

Add
Our Price: $810.00

Add
ANALOG PYROMETER FOR OLYMPIC DOWNDRAFT KILNS ELECTRONIC WALL UNIT INCLUDING VALVE FOR OLYMPIC GAS KILNS

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Kilns > Olympic Kilns > Olympic Gas Raku and TorchBearer Kilns
Kilns > Gas Kilns