Paragon TnF-27-3 Kiln
The TnF-27-3 is easier to load than the
deeper studio kilns. It is only 22 ¼ deep, yet larger inside than the
29 deep 10-sided 24-series kilns.
The TnF-27-3 features sectional construction.
Separate the kiln bottom and two sections to repair bricks, change
elements, or to move the kiln down narrow stairwells or through the
narrowest doorways. Twist-lock spring latches hold the assembled
The top row of brick in the TnF-27-3 is 2
high and without element grooves. It is less susceptible to damage
during loading than a grooved brick.
The massive, 12-sided Paragon digital
TnF-27-3 kiln is a profit center of the busy ceramic studio. It eats up
stacks of low-fire ware as well as porcelain and stoneware. It is rated
to a full cone 10. At a cost per cubic foot, the TnF-27-3 is one of the
most economically priced standard kilns we make.
During busy seasons when orders are
backlogged, you will be grateful you own a dependable Paragon kiln.
Studio owners call these kilns real work horses.
Paragon studio kilns have withstood years of
abuse in school environments. High school ceramics teachers fire these
kilns unmercifully, without remorse. Yet the kilns keep going. People
swear by them.
Easy Access Switch Box
Hinged at the bottom, the switch box on 8, 10
& 12 sided TnF kilns opens forward for easy maintenance. A folding
support arm holds the box in the open position. The Sentry is mounted
at the top of the switch box within easy reach. Operate it from a
The TnF-27-3 uses deluxe 3 thick firebrick
throughout: in the sidewalls, the reversible brick bottom, and the 3
thick lid. The massive lid is easy to lift with Paragon's patented
LiteLid, which does away with cumbersome pulleys and cords and
reduces lid weight to only several pounds of pressure. Most people can
lift the lid with one hand. Unlike pulleys and weights, the LiteLid is
self-contained on the kiln. No need to drill holes in the ceiling for
pulleys. The LiteLid sharply reduces wear between the lid and top rim
of firebrick. The truss and floating lid allow expansion of the lid.
Ask competitors if their lid spring includes a truss and floating lid.
The 24 wide stand for the TnF-27-3 kiln
supports the brick bottom with framing that is 4 ½ wide across the top
of each side. The stand is rock-steady, with 16-gauge frame and heavy
If you move your kiln out of the way when not in use, order an optional deluxe kiln stand with steel casters.
- Lock-in lid support
- Large, tapered peepholes
- Ventilated switch box
- Hand lifts
- Dropped, recessed brick groovesno pins needed
- Heavy duty elements
- Dust-free coating in the peepholes, both sides of the lid and top rim of firebrick
- Heavy gauge stainless steel case
- Operating instructions silk-screened on the switch box
- Certified to CSA & UL Standard 499
- Full-formed galvanized steel base plate
The Optional Furniture Kit (not included)
The furniture kit consists of carefully
selected fireclay shelves and posts for this particular model. When
estimating the price of the kiln, include the cost of furniture. The
furniture allows you to stack multiple layers of ware. Without it, you
could fire only the ware that would fit on the kiln bottom.
Furniture Kit for S-28-3, SnF-28-3, TnF-28-3, Viking-28:
8 C-24H 1/2 Shelves (26 round x ¾ thick)
1 wide Square Posts, 8 of each -
1, 2, 3, 4, 5, 6 lengths
1 lb. Bag Kiln Wash
Furniture Kit Shipping Weight: 164 lbs.