The Janus-27 Glass/Pottery Kiln
The new Paragon Janus-27 can fire both pottery and glass. Heating elements are mounted in the top and sidewalls.
Select between glass and pottery with the
flip of a switch. With the switch in the glass position, heat comes
from the top elements and the middle sidewall element. With the switch
in the pottery position, heat comes from only the sidewall elements.
In the glass mode, fuse and sag large glass
projects placed on a single shelf. In the pottery mode, fire to cone
10. You can also fire several shelves of smaller glass pieces using the
pottery mode.
The elements in the lid are mounted in a
firebrick ball groove that eliminates element pins. The element coils
are wider than the groove opening, so the elements stay in place
without pins. The groove dissipates heat efficiently.
The lid on the Janus-27 is easy to lift with
the exclusive, patented Paragon spring counter-balance. For easier
maintenance, we use 2 high blank wall bricks in the top row of the
Janus-27. Since the brick is without element grooves, it is less
susceptible to damage during loading.
The patented control box on the Janus-27
opens forward for easy maintenance. A folding support arm holds the box
in the open position.
The digital Sentry 2.0 includes two modes: Cone-Fire with programmed
slow cooling and 18-Segment Ramp-Hold. It is manufactured by the Orton
Ceramic Foundation exclusively for Paragon.
A heavy galvanized steel base covers the
reversible brick bottom completely. It folds up under the stainless
case on all sides to strengthen the firing chamber. This is one more
assurance that your Paragon kiln is built to last.
You will be amazed at the convenience of digital firing. The reliable solid-state Sentry
controller continually monitors the firing so you can spend your time
productively without closely watching the kiln. (Please remember,
however, to check the kiln during firing and to monitor it near the
expected shutoff time.) The sealed touch pad keeps out dust and is easy
to wipe clean.
The controller has powerful features that
you will enjoy using. Yet we have also worked hard to make the
controller user-friendly.
Do you ever wonder how much electricity
your kiln uses? The digital controller can figure this for you with the
press of a button. Find out how little a kiln actually costs to fire.
Learn to conserve energy by experimenting with firing speed, load
density, etc.
- Glass/pottery selection switch
- 3 insulating refractory firebrick walls
- Sidewall elements in dropped, recessed brick grooves are easy to replace.
- Tapered peepholes for a wide view
- A steel floor pan supports the entire brick bottom of each kiln.
- One year limited warranty
- Available in 240, 200, 208, or 380 volt, 50 or 60 hertz, single or 3 phase.
- Easy-access control box with folding support arm.
- Since the Janus-27 is designed for porcelain, it also easily fire ceramics, china paint, decals, gold and, of course, glass.
The Optional Furniture Kit (not included)
The furniture kit consists of carefully
selected fireclay shelves and posts for this particular model. When
estimating the price of the kiln, include the cost of furniture. The
furniture allows you to stack multiple layers of ware. Without it, you
could fire only the ware that would fit on the kiln bottom.
Furniture Kit for Janus-27, TnF-27-3:
6 C-24H 1/2 Shelves (26 round x Ύ thick)
1 wide Square Posts, 6 of each -
1, 2, 3, 4, 5, 6 lengths
1 lb. Bag Kiln Wash
Furniture Kit Shipping Weight: 145 lbs.
|
