Paragon Fusion-7 Glass Fusing Kiln
Paragon’s new Fusion-series digital hot glass
kilns are packed with exciting features. They come in 6, 7, 8 and
10-sided versions. The Fusion-7 is the 7-sided version.
The digital Sentry Xpress 3 key controller
comes standard on all Fusion-series kilns. Control both heating and
cooling with simple 3-key operation.
The Fusion-7 offers the convenience of 120 volt operation.
The Fusion-series lid elements use a new
element groove that eliminates element pins. The element coils are
wider than the groove opening, so the elements stay in place without
pins.
A heavy galvanized steel base covers the
reversible brick bottom completely. It folds up under the stainless
case on all sides to strengthen the firing chamber. This is one more
assurance that your Paragon kiln is built to last.
Judith Conway of Vitrum Studio said, “The
Paragon Fusion-7 is an excellent kiln. Operating on regular household
current, it is an easy addition to your home/studio. And Paragon offers
better-than-excellent customer service. We have sold many, many
Fusion-7's, and all our customers/students/friends recommend them to
others as both a great starter kiln and a kiln to keep on hand for both
test firings and smaller firings and smaller load firings in the years
to come.”
Imagine the glass you could sag, slump, and
fuse with this kiln. Make small bowls, pendants, earrings, cufflinks,
and even bracelets. Enjoy the glittering beauty of dichroics. Make
treasured gifts. When you own a Paragon kiln, you can experiment with
new glass ideas to your heart’s content.
Becky Johnson, a glass teacher in Dallas,
Texas, describes the excitement of a kiln: “I like to open the kiln
with my students so that we can review and admire each other’s
treasures together. The transformation of the glass inside the kiln is
magical and mystical. It changes from pieces of arranged cut glass to
awe-inspiring art. To be some part of that process is a true gift.”
The Sentry Xpress 3-key controller is packed with features. It includes two modes: Single Speed and 8-segment Ramp-Hold.
Features of the Sentry Xpress 3-key Controller on Non-Ceramic Paragon Kilns
- Design programs with up to 8 segments (steps) in Ramp-Hold mode.
- Fire to a single temperature at a single speed in the simplified Single Speed mode.
- Ramp-Hold mode can store 4 programs.
- Skip a segment in Ramp-Hold during firing without having to stop the kiln to reprogram.
- Change the target temperature in Ramp-Hold during firing without having to stop the kiln to reprogram.
- Hold (soak) the temperature in both Single Speed and
Ramp-Hold. Experiment with Hold to improve color saturation of china
paints.
- Add Hold Time during firing without having to stop the kiln to reprogram.
- Control both heating and cooling in Ramp-Hold.
- Program Review lets you check the program you are about to fire.
- Program the Temperature Alarm to sound when the kiln reaches a
specific temperature. Use this to remind yourself to check on the kiln.
- Temperature display throughout firing and cooling in your choice of °F or °C
- Thermocouple Offset adjusts the thermocouple readout.
- Set the Delay to turn on the kiln later to suit your schedule.
- Error Messages report mechanical problems such as a disconnected thermocouple, stuck relay or broken element.
- 12 Month Warranty
- LED Lights show whether you are in program, review, or firing mode.
- Colorful, illustrated instruction manual. Download it from the
“Additional Information” section below to review these features in more
detail.
Features of the Fusion-7
- Digital Sentry Xpress with 8 Segment Ramp-Hold, Skip Segment & Program Review
- Heating elements in top of all models
- Element groove that eliminates element pins
- ¼” heavy duty sheathed Type-K thermocouple
- 2 ½” insulating refractory firebrick in walls and bottom; 3” firebrick lid
- Lock-in lid support
- Full-formed galvanized steel base
- Louvered switch box, heavy duty wiring
- Tapered peephole with plug for a wide view
The
Fusion-7 can now ship by UPS. Enjoy lower shipping cost and faster
service. Specially designed cartons and foam padding assure that the
kiln will arrive safely.
The Optional Furniture Kit (not included): Fits Fusion-7 & GF-7B
Glass must be fired on a ceramic shelf; never directly on the kiln firing chamber bottom.
1 - C-13 - 13” Round Shelf
4 - 1” wide Square Posts, ½” long
1 lb. Bag Glass Separator | 
