|
|
(Your shopping cart is empty)
|
|
 |
|
|
Olympic Torchbearer and Raku Gas Kiln OPTIONAL ACCESSORIES
 Analog Pyrometer - An analog pyrometer is an available option for
measuring temperature of the kiln while firing. Pryometers are
not installed directly on gas kilns and the instrucent itself
should be wall mounted away from thekilnto prevent damage
to the instrument. Olympic's pyrometer is rate
0-2500F.
Digital Pyrometer
 Gas Kiln Sitter System - A gas kiln sitter and limit timer is an
available option for Olympic Torch Bearer kilns. The kiln sitter provides an
automatic shut-off when the kiln reaches a specificed cone
temperature. The limit timer will shut the kiln off at a preset
time. An electric vave runs the gas kiln sitter on 120 volts.
Kiln Sitter with Limit Timer
 120 Volt High Limit Electronic Controller - Olympic's electronic wall
unit features programming by cone number or allows you to
create your own programs. Each program has eight
segments with ramp/hold profiles and controlled cooling
rate. The controller also features numerous means for
diagnosing problems and convenient program review before
or during a firing. Because the electronic controller runs in
an on/off mode and is not proportional, the gas kiln operator
will need to manually adjust the gas flow several times as
the kiln reaches 1500F, when the controller can fully
automate the firing.
The
normally optional IGNITION SYSTEM WITH SAFETY THERMOCOUPLE SHUTOFF
VALVE is included with all of our Olympic Gas Raku and Torchbearer
Kilns except where noted.
If you need them as a replacement part they are:
23" Gas Ignition System
28" Gas Ignition System
|
|
|
Olympic Torchbearer and Raku Gas Kiln OPTIONAL ACCESSORIES
|
|
|
|
