Home > Equipment > Clay Extruders > North Star Clay Extruders > Dies and Die Sets for North Star Clay Extruders >

North Star Equipment #7 Triple Rope Handles Die Set


North Star Equipment #7 Triple Rope Handles Die Set


 
Our Price: $105.99
Item Class Clay Extruders and Dies


Product Code:
NS925DS7
Qty:

Description
 

North Star Equipment #7 Triple Rope Handles Die Set


North Star triple rope handle die setNorth Star Equipment #7 Triple Rope Handles Die Set is 3 dies, 3/4, 7/8 and 1" All solid. For 4" Standard and Stainless Extruders.
Includes
DS7A - 1 1/8" Wide x 3/8" Tall -Handle
DS7B -1 3/8" Wide x 11/16" Tall - Handle
DS7C - 1 9/16" Wide x 3/4" Tall - Handle

The 4" extruder dies are made of 1/2" HDPE (High Density polyethylene). Which is extremely wear-resistant and completely non-contaminating. The top edge of the die cavity is beveled to compact the clay as it passes through, giving a crisp, more solid extrusion. In the hollow dies, there is a bevel on both the interior and exterior portions under each side of the bracket (which holds the center of the hollow dies) that helps the extrusion to "heal" after is has been cut apart by the bracket. This bracket fits into a slot machined into the top of the hollow die and is held in place by the barrel of the extruder. If a hollow die is mounted in place, the center part of the die is in exactly the right place and the wall thickness will automatically be even all the way around. In general, the walls of extrusions 3-1/2 inches OD or less are 1/4 inch thick, while larger pieces have 5/16 inch walls.


Browse for more products in the same category as this item:

Equipment > Clay Extruders > North Star Clay Extruders > Dies and Die Sets for North Star Clay Extruders
Equipment > Clay Extruders > North Star Clay Extruders